Contact Us | Language: čeština English
Title: | Polymer fluidity influenced by the percentage of filler | ||||||||||
Author: | Staněk, Michal; Maňas, David; Maňas, Miroslav; Kyas, Kamil; Šenkeřík, Vojtěch; Škrobák, Adam; Navrátil, Jan | ||||||||||
Document type: | Peer-reviewed article (English) | ||||||||||
Source document: | International Journal of Mathematics and Computers in Simulation. 2012, vol. 6, issue 6, p. 542-549 | ||||||||||
ISSN: | 1998-0159 (Sherpa/RoMEO, JCR) | ||||||||||
Journal Impact
This chart shows the development of journal-level impact metrics in time
|
|||||||||||
Abstract: | Delivery of polymer melts into the mold cavity is the most important stage of the injection molding process. This paper shows the influence of cavity surface roughness and technological parameters on the flow length of polymers into mold cavity. Application of the measurement results may have significant influence on the production of shaping parts of the injection molds especially in changing the so far used processes and substituting them by less costly production processes which might increase the competitiveness of the tool producers and shorten the time between product plan and its implementation. | ||||||||||
Full text: | http://www.naun.org/multimedia/NAUN/mcs/16-590.pdf | ||||||||||
Show full item record |