Publikace UTB
Repozitář publikační činnosti UTB
Rheological characterization of powder injection moulding using feedstock based on aluminium oxide and multicomponent water-soluble polymer binder
Repozitář DSpace/Manakin
Kontaktujte nás | Jazyk: čeština English
- Domovská stránka DSpace
- →
- Článek ve sborníku
- →
- Univerzitní institut
- →
- Zobrazit záznam
JavaScript is disabled for your browser. Some features of this site may not work without it.
| Název: | Rheological characterization of powder injection moulding using feedstock based on aluminium oxide and multicomponent water-soluble polymer binder |
| Autor: | Hausnerová, Berenika; Marcaníková, Lucie; Filip, Petr; Sáha, Petr |
| Typ dokumentu: | Článek ve sborníku (English) |
| Zdrojový dok.: | Recent Advances in Fluid Mechanics and Heat and Mass Transfer - Proc. of the 9th IASME / WSEAS Int. Conf. on Fluid Mechanics and Aerodynamics, FMA'11, Proc. of the 9th IASME / WSEAS Int. Conf. HTE'11. 2011, p. 245-250 |
| ISBN: |
|
| Abstrakt: | Rheological analysis of powder injection moulding of feedstock based on aluminium oxide powderand multicomponent partly water-soluble polymeric binder is carried out with the aim to produce the defectfree and non-porous parts. As this process is characterized by the flow of highly filled (60 vol.%) compound into a mould cavity, rheological properties supplemented by thermal and pressure-volume-temperature characteristics are measured and described. Structural changes of the feedstock caused by shear deformation are quantified in terms of yield stresses obtained using the Herschel-Bulkley and Casson models. For a description of non-monotonous flow behaviour of the feedstock, the rheological model valid in the whole shear rate range measured is developed. |
| Plný text: | http://www.wseas.us/e-library/conferences/2011/Florence/HEAFLU/HEAFLU-40.pdf |
| Zobrazit celý záznam | |
Soubory tohoto záznamu
Citace ČSN ISO 690:2011
Citace článku v konferenčním sborníku:
HAUSNEROVÁ, Berenika, Lucie MARCANÍKOVÁ, Petr FILIP a Petr SÁHA. Rheological characterization of powder injection moulding using feedstock based on aluminium oxide and multicomponent water-soluble polymer binder. In: Recent Advances in Fluid Mechanics and Heat and Mass Transfer - Proc. of the 9th IASME / WSEAS Int. Conf. on Fluid Mechanics and Aerodynamics, FMA'11, Proc. of the 9th IASME / WSEAS Int. Conf. HTE'11 [online]. Florence: 2011, s. 245-250. [cit. 2024-12-12]. Dostupné z: http://www.wseas.us/e-library/conferences/2011/Florence/HEAFLU/HEAFLU-40.pdf.
Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.
HAUSNEROVÁ, Berenika, Lucie MARCANÍKOVÁ, Petr FILIP a Petr SÁHA. Rheological characterization of powder injection moulding using feedstock based on aluminium oxide and multicomponent water-soluble polymer binder. In: Recent Advances in Fluid Mechanics and Heat and Mass Transfer - Proc. of the 9th IASME / WSEAS Int. Conf. on Fluid Mechanics and Aerodynamics, FMA'11, Proc. of the 9th IASME / WSEAS Int. Conf. HTE'11 [online]. Florence: 2011, s. 245-250. [cit. 2024-12-12]. Dostupné z: http://www.wseas.us/e-library/conferences/2011/Florence/HEAFLU/HEAFLU-40.pdf.
Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.
