Control of interval systems using 2DOF configuration

Matušů, Radek; Prokop, Roman

Název:

Autor:

Matušů, Radek; Prokop, Roman

Typ dokumentu:

Článek ve sborníku (English)

Zdrojový dok.:

Procedia Engineering. 2015, vol. 100, issue C, p. 340-344

ISSN:

1876-6102 (Sherpa/RoMEO, JCR)

Journal Impact This chart shows the development of journal-level impact metrics in time

JCR	Journal Citation Reports - Impact Factor
SNIP	SCImago Source Normalized Impact per Paper
SJR	SCImago Journal Rank
IPP	SCImago Impact per Publication
CS	Scopus CiteScore

(Note: The metrics are not comparable against one another.)

DOI:

https://doi.org/10.1016/j.proeng.2015.01.377

Abstrakt:

This contribution is focused on continuous-time control of interval systems by means of two-degree-of-freedom (2DOF) configuration. The controller design utilizes algebraic techniques in the ring of proper and (Hurwitz-)stable rational functions (RPS). Robust stability of resulting 2DOF loops is analyzed graphically, namely with the assistance of the value set concept and the zero exclusion condition. In the presented illustrative example, a third order interval plant is robustly stabilized. © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.

Plný text:

https://www.sciencedirect.com/science/article/pii/S187770581500404X

Zobrazit celý záznam

Soubory tohoto záznamu

Název: Fulltext_1004551.pdf

Velikost: 508.9Kb

Formát: PDF

Popis: fulltext

Zobrazit/otevřít

Citace ČSN ISO 690:2011

Citace článku v konferenčním sborníku:
MATUŠŮ, Radek a Roman PROKOP. Control of interval systems using 2DOF configuration. In: Procedia Engineering [online]. Vienna: Elsevier, 2015, s. 340-344. [cit. 2024-12-12]. ISSN 1876-6102. Dostupné z: https://www.sciencedirect.com/science/article/pii/S187770581500404X.

Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.