Production of acrylonitrile butadiene styrene/high-density polyethylene composites from waste sources by using coupling agents

Miskolczi, Norbert; Szakacs, Hajnalka; Sedlařík, Vladimír; Kucharczyk, Pavel; Riegel, E.

Název:

Autor:

Miskolczi, Norbert; Szakacs, Hajnalka; Sedlařík, Vladimír; Kucharczyk, Pavel; Riegel, E.

Typ dokumentu:

Recenzovaný odborný článek (English)

Zdrojový dok.:

Mechanics of Composite Materials. 2014, vol. 50, issue 3, p. 377-386

ISSN:

0191-5665 (Sherpa/RoMEO, JCR)

Journal Impact This chart shows the development of journal-level impact metrics in time

JCR	Journal Citation Reports - Impact Factor
SNIP	SCImago Source Normalized Impact per Paper
SJR	SCImago Journal Rank
IPP	SCImago Impact per Publication
CS	Scopus CiteScore

(Note: The metrics are not comparable against one another.)

DOI:

https://doi.org/10.1007/s11029-014-9423-1

Abstrakt:

A possible way of recycling plastic wastes has been investigated. Polyalkenyl-poly-maleic-anhydride derivates were synthesized and employed in ABS and HDPE blends to eliminate their immiscibility. By this way, the recycling of ABS and HDPE could be performed with improved mechanical properties of reshaped specimens. © 2014 Springer Science+Business Media New York.

Plný text:

https://link.springer.com/article/10.1007/s11029-014-9423-1

Zobrazit celý záznam

Soubory tohoto záznamu

Název: Fulltext_1003838.pdf

Velikost: 402.7Kb

Formát: PDF

Popis: fulltext

Citace ČSN ISO 690:2011

Citace článku v časopise:
MISKOLCZI, Norbert, Hajnalka SZAKACS, Vladimír SEDLAŘÍK, Pavel KUCHARCZYK a E. RIEGEL. Production of acrylonitrile butadiene styrene/high-density polyethylene composites from waste sources by using coupling agents. Mechanics of Composite Materials [online]. 2014, vol. 50, iss. 3, s. 377-386. [cit. 2024-12-12]. ISSN 0191-5665. Dostupné z: https://link.springer.com/article/10.1007/s11029-014-9423-1.

Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.