PP/MMT nanocomposite: Mathematic modelling of layered nanofiller

Měřínská, Dagmar; Mikula, Jaroslav; Kubišová, Hana; Svoboda (FT), Petr

Název:

Autor:

Měřínská, Dagmar; Mikula, Jaroslav; Kubišová, Hana; Svoboda (FT), Petr

Typ dokumentu:

Recenzovaný odborný článek (English)

Zdrojový dok.:

Journal of Nanomaterials. 2012, vol. 68, issue 6

ISSN:

1687-4110 (Sherpa/RoMEO, JCR)

Journal Impact This chart shows the development of journal-level impact metrics in time

JCR	Journal Citation Reports - Impact Factor
SNIP	SCImago Source Normalized Impact per Paper
SJR	SCImago Journal Rank
IPP	SCImago Impact per Publication
CS	Scopus CiteScore

(Note: The metrics are not comparable against one another.)

DOI:

https://doi.org/10.1155/2012/860371

Abstrakt:

The comparison of calculated data from proposed mathematic model and experimentally obtained data of PP/clay nanocomposites was done with the focus on the layered shape of MMT platelets. Based on the well-known Kerner's model and the Halpin-Tsai' equation with the use of some described presumption, the mathematic model for PP/clay nanocomposite was proposed. Data from the measurement of prepared PP/clay samples were taken and compared with the calculated ones from the proposed model. The good agreement was found. Copyright © 2012 Dagmar Merinska et al.

Plný text:

http://www.hindawi.com/journals/jnm/2012/860371/

Zobrazit celý záznam

Soubory tohoto záznamu

Název: Fulltext_1002881.pdf

Velikost: 3.350Mb

Formát: PDF

Popis: fulltext

Zobrazit/otevřít

Citace ČSN ISO 690:2011

Citace článku v časopise:
MĚŘÍNSKÁ, Dagmar, Jaroslav MIKULA, Hana KUBIŠOVÁ a Petr SVOBODA (FT). PP/MMT nanocomposite: Mathematic modelling of layered nanofiller. Journal of Nanomaterials [online]. 2012, vol. 68, iss. 6 [cit. 2024-12-12]. ISSN 1687-4110. Dostupné z: http://www.hindawi.com/journals/jnm/2012/860371/.

Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.