TBU Publications
Repository of TBU Publications

Kvantitativní fraktografie při ohybově torzním namáhání

DSpace Repository

Title: Quantitative fractography in bending-torsion fatigue
Author: Slámečka, Karel; Ponížil, Petr; Pokluda, Jaroslav
Document type: Peer-reviewed article; Conference paper (English)
Source document: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing. 2007-07-25, vol. 462, issue 1-2, p. 359-362
ISSN: 0921-5093 (Sherpa/RoMEO, JCR)
Journal Impact This chart shows the development of journal-level impact metrics in time
JCR Journal Citation Reports - Impact Factor
SNIP SCImago Source Normalized Impact per Paper
SJR SCImago Journal Rank
IPP SCImago Impact per Publication
CS Scopus CiteScore
(Note: The metrics are not comparable against one another.)
DOI: https://doi.org/10.1016/j.msea.2006.03.153
Abstract: The paper deals with a quantitative analysis of fracture surface roughness generated under combined bending-torsion fatigue in a high-strength low-alloy steel. Changes in several amplitude, spectral and hybrid profile roughness parameters are investigated for sets of profiles parallel and perpendicular to the local crack propagation direction in dependence on the loading ratio. Profile fractal dimension is also calculated as a "scale-independent" characteristic. Most of profile roughness parameters start to rapidly increase above the critical value r(c) approximate to 0.5 of the loading ratio r = tau(a)/(sigma(a)+tau(a)), where as is the bending amplitude and is is the torsion amplitude. (C) 2006 Elsevier B.V. All rights reserved.
Full text: https://www.sciencedirect.com/science/article/pii/S0921509306019058
Show full item record

Find Full text Export to RefWorks
   

 

Files in this item

Icon
Name: Fulltext_1001912.pdf
Size: 723.7Kb
Format: PDF
Description: fulltext

ČSN ISO 690:2011 citation

Citace článku v časopise:
SLÁMEČKA, Karel, Petr PONÍŽIL a Jaroslav POKLUDA. Kvantitativní fraktografie při ohybově torzním namáhání. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing [online]. 2007, vol. 462, iss. 1-2, s. 359-362. [cit. 2024-12-12]. ISSN 0921-5093. Dostupné z: https://www.sciencedirect.com/science/article/pii/S0921509306019058.

Citace článku v konferenčním sborníku:
SLÁMEČKA, Karel, Petr PONÍŽIL a Jaroslav POKLUDA. Kvantitativní fraktografie při ohybově torzním namáhání. In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing [online]. Prague: Elsevier Science SA, 2007-07-25, s. 359-362. [cit. 2024-12-12]. ISSN 0921-5093. Dostupné z: https://www.sciencedirect.com/science/article/pii/S0921509306019058.

These citations are software generated and may contain errors. To verify accuracy, check the appropriate style guide.

Related articles