Design of information system for advanced technologies production sustainability

Majstorovic, Vidosav; Sun, Shufeng; Kubišová, Milena; Knapčíková, Lucia; Hricová, Romana; Tkáč, Jozef

dc.title	Design of information system for advanced technologies production sustainability	en
dc.contributor.author	Majstorovic, Vidosav
dc.contributor.author	Sun, Shufeng
dc.contributor.author	Kubišová, Milena
dc.contributor.author	Knapčíková, Lucia
dc.contributor.author	Hricová, Romana
dc.contributor.author	Tkáč, Jozef
dc.relation.ispartof	2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022
dc.identifier.isbn	978-1-66547-235-7
dc.date.issued	2022
dc.citation.spage	150
dc.citation.epage	156
dc.event.title	13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022
dc.event.location	Bratislava
utb.event.state-en	Slovakia
utb.event.state-cs	Slovensko
dc.event.sdate	2022-07-20
dc.event.edate	2022-07-22
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Institute of Electrical and Electronics Engineers Inc.
dc.identifier.doi	10.1109/ICMAE56000.2022.9852909
dc.relation.uri	https://ieeexplore.ieee.org/document/9852909
dc.relation.uri	https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9852909
dc.subject	advanced technologies	en
dc.subject	information system	en
dc.subject	processes comparison methodology	en
dc.subject	sustainability	en
dc.description.abstract	Environmental protection is an integral part of the strategy of responsible companies and organizations. Through industrial production, the planet's resources are degraded and destroyed for a long time. The only way to preserve nature is to slow down and finally stop the unsustainable method of production. The article deals with the application of information system developed at the Technical University of Kosice to the analysis of basic legal and professional approaches to sustainable production methods evaluation and with application to advanced technologies process planning. A simple methodology implemented in the Information system was created in cooperation with a multidisciplinary international team. The methodology can be used for various sizes of manufacturing companies. This methodology is based on the ISO 14040 standard and offers the possibility of an effective comparison of the economic and environmental impacts of the proposed production processes. The contribution presents an evaluation of the information system in production process design for a selected part and presents the economic and environmental impact of the five selected processes. © 2022 IEEE.	en
utb.faculty	Faculty of Technology
dc.identifier.uri	http://hdl.handle.net/10563/1011127
utb.identifier.obdid	43884303
utb.identifier.scopus	2-s2.0-85137266546
utb.source	d-scopus
dc.date.accessioned	2022-09-20T08:07:43Z
dc.date.available	2022-09-20T08:07:43Z
utb.ou	Department of Production Engineering
utb.contributor.internalauthor	Kubišová, Milena
utb.fulltext.affiliation	Vidosav Majstorovic Faculty of Mechanical Engineering University of Belgrade Belgrade, Serbia [email protected] Shufeng Sun School of Mechanical & Automotive Engineering Qingdao University of Technology Qingdao, PR of China [email protected] Milena Kubisova Department of Production Engineering Tomas Bata University in Zlin Zlin, Czech Republic [email protected] Lucia Knapcíkova Faculty of Manufacturing Technologies Technical University of Kosice Presov, Slovakia [email protected] Romana Hricova Faculty of Manufacturing Technologies Technical University of Kosice Presov, Slovakia [email protected] Jozef Tkac Faculty of Manufacturing Technologies Technical University of Kosice Presov, Slovakia [email protected]
utb.fulltext.dates	-
utb.fulltext.references	[1] “The 2030 Agenda for Sustainable Development”, United Nations, General Assembly 2015 [2] “United Nations Framework Convention on Climate Change”, United Nations, 1992 - 2013 [3] “Kyoto Protocol” , Organisation of United Nations, Kyoto 1997, https://unfccc.int/process-and-meetings/the-kyoto-protocol/history-ofthe-kyoto-protocol/text-of-the-kyoto-protocol [4] “Paris Agreement”, Organisation of United Nations, Paris, 2015 https://unfccc.int/files/meetings/paris_nov_2015/application/pdf/paris_agreement_english_.pdf [5] ISO 14040:2006 “Environmental management — Life cycle assessment — Principles and framework” [6] M. Ashby, “Eco design and the Eco Audit tool”, Granta Design, Cambridge, 2018, Granta Education Hub [7] F. Giudice, G. La Rosa, A. Risitano “Product Design for the Environment - A Life Cycle Approach”, 2006, Taylor and Francis, ISBN 978-0-8493-2722-3 [8] P. P. Monka, K. Monková, M. Hatala, M. Janák, “Multi-variant process plan creation from view of economics and technological criteria” 2007.In: APE'2007. - Warsaw : University of Technology, ISBN 9788391623473 [9] K. Monková, P. P. Monka, “Newly Developed Software Application for Multiple Access Process Planning”, 2014.In: Advances in Mechanical Engineering. P. 39071-39071. - ISSN 1687-8132 [10] K. Monková, P. P. Monka, “The coding of manufacturing system objects inside the new software application”, 2008.In: Archiwum technologii maszyn i automatyzacji. Vol, 28, no. 4 (2008), p. 63-70. - ISSN 1233-9709 [11] K. Monková et al, “Data flow for object manufacturing inside of information system for Industry 4.0”, 2018.In: MMS 2018 : 3rd EAI International Conference on Management of Manufacturing Systems. – Gent : European Alliance for Innovation, ISBN 978-1-63190-167-6 - ISSN 2593-7642 [12] K. Monková, P.P. Monka, H. Zidkova, V Duchek, M. Edl, “Basicassumptions of information systems for increasing competitiveness of production companies within the EU and their application of the CAPP system design” 2019.In: Smart Technology Trends in Industrial and Business Management. - Cham: Springer International Publishing AG , ISBN 978-3-319-76997-4 [13] P. Hreha et al, “Roughness parameters calculation by means of on-line vibration monitoring emerging from AWJ interaction with material”, 2015.In: Metrology and Measurement Systems. Vol. 22, no. 2 (2015), p. 315-326. - ISSN 0860-8229 [14] The European Union “Advanced technologies” https://ec.europa.eu/growth/industry/strategy/advanced-technologies_en, accessed on April 27th 2022 [15] O. Kerbat, “Environmental Impact Assessment Studies in Additive Manufacturing”, In: Handbook of sustainability in Additive Manufacturing, Volume 2, Springer, 2016, Singapore [16] M. Vasina et al: “A Study of Factors Influencing Sound Absorption Properties of Porous Materials” 2019.In: Manufacturing Technology. - Ústí nad Labem (Czechia), Vol. 19, č. 1 (2019), ISSN 1213-2489 [17] G. Varga et al: Experimental Examination of Surface Roughness in Low-Environmental-Load Machining of External Cylindrical Workpieces, In: Advances in Manufacturing II, VOL 2 of Lecture Notes in Mechanical Engineering DOI: 10.1007/978-3-030-18789-7_26, 2019 [18] DIN 8580 “Manufacturing processes - Terms and definitions, division” [19] Guideline 2860 of The Association of German Engineers [20] K. Salonitis, “Energy Efficiency of Metallic Powder Bed Additive Manufacturing Processes”, In: Handbook of sustainability in Additive Manufacturing, Volume 2, Springer, 2016, Singapore [21] J. Petru et al, “Influence of cutting parameters on heat-affected zone after laser cutting” 2013.In: Tehnički vjesnik - Technical Gazette. Vol. 20, no. 2 (2013), p. 225-230. - ISSN 1330-3651 [22] D. Kinik, et al, “On-line monitoring of technological process of material abrasive water jet cutting”, 2015.In: Tehnicki Vjesnik. Vol. 22, no. 2 (2015), p. 351-357. - ISSN 1330-3651 [23] C. Felho, G. Varga, “Theoretical Roughness Modeling of Hard Turned Surfaces Considering Tool Wear” In: MACHINES Volume: 10 Issue: 3 Article Number: 188 DOI: 10.3390/machines10030188
utb.fulltext.sponsorship	The presented version of the information system was built, maintained and run by the physical subsidy of the Laboratory for automation, robotization and rapid prototyping of the Department of Production Engineering of Tomas Bata University in Zlin. This contribution research activity was prepared with the main financial support of the Ministry of Education, Science, Research, and Sport of the Slovak Republic grants by its Slovak Research and Development Agency: SK-CN-21-0046 “Research on femtosecond laser ultrasonic and abrasive grains hybrid processing micro structural surfaces of hard brittle materials” and APVV-19-0550 “Investigation of cellular material properties”. Also, funding the Cultural and Educational Grant Agency of the Ministry under KEGA 032TUKE-4/2022 “Research on the implementation of innovative elements to increase the complexity and effectiveness of education in the field of interdisciplinary skills in the field of study 36 Mechanical Engineering” was used for the research activities. The contribution experimentation is financed by the European Union via the Slovak operation program “Research and Innovation” grant OPVaI-MH/DP/2018/1.2.2-17 “Advanced planning and management of discrete production”.
utb.scopus.affiliation	University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia; Qingdao University of Technology, School of Mechanical & Automotive Engineering, Qingdao, China; Tomas Bata University in Zlin, Department of Production Engineering, Zlin, Czech Republic; Technical University of Kosice, Faculty of Manufacturing Technologies, Presov, Slovakia
utb.fulltext.projects	SK-CN-21-0046
utb.fulltext.projects	APVV-19-0550
utb.fulltext.projects	KEGA 032TUKE-4/2022
utb.fulltext.projects	OPVaI-MH/DP/2018/1.2.2-17
utb.fulltext.faculty	Faculty of Technology
utb.fulltext.ou	Department of Production Engineering
utb.identifier.jel	-