Publikace UTB
Repozitář publikační činnosti UTB

A study on the applicability of thermodynamic sensors in fermentation processes in selected foods

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title A study on the applicability of thermodynamic sensors in fermentation processes in selected foods en
dc.contributor.author Adámek, Martin
dc.contributor.author Matyáš, Jiří
dc.contributor.author Adámková, Anna
dc.contributor.author Mlček, Jiří
dc.contributor.author Búran, Martin
dc.contributor.author Černeková, Martina
dc.contributor.author Ševčíková, Veronika
dc.contributor.author Zvonková, Magdaléna
dc.contributor.author Slobodian, Petr
dc.contributor.author Olejník, Robert
dc.relation.ispartof Sensors
dc.identifier.issn 1424-8220 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2022-03-03
utb.relation.volume 22
utb.relation.issue 5
dc.citation.spage 1997
dc.type article
dc.language.iso en
dc.publisher MDPI
dc.identifier.doi 10.3390/s22051997
dc.relation.uri https://www.mdpi.com/1424-8220/22/5/1997
dc.subject fermentation en
dc.subject thermodynamic sensors en
dc.subject yeast en
dc.description.abstract This study focuses on the use of thermodynamic sensors (TDS) in baking, brewing, and yogurt production at home. Using thermodynamic sensors, a change in the temperature flow between the two sensor elements during fermentation was observed for the final mixture (complete recipe for pizza dough production), showing the possibility of distinguishing some phases of the fermentation process. Even during the fermentation process in the preparation of wort and yogurt with non-traditional additives, the sensors were able to indicate significant parts of the process, including the end of the process. The research article also mentions as a new idea the use of trivial regulation at home in food production to determine the course of the fermentation process. The results presented in this article show the possibility of using TDS for more accurate characterization and adjustment of the production process of selected foods in the basic phase, which will be further applicable in the food industry, with the potential to reduce the cost of food production processes that involve a fermentation process. © 2022 by the authors. Licensee MDPI, Basel, Switzerland. en
utb.faculty Faculty of Technology
utb.faculty University Institute
utb.faculty Faculty of Technology
utb.faculty Faculty of Technology
utb.faculty Faculty of Technology
dc.identifier.uri http://hdl.handle.net/10563/1010892
utb.identifier.obdid 43883783
utb.identifier.scopus 2-s2.0-85125961927
utb.identifier.wok 000768847900001
utb.identifier.pubmed 35271145
utb.source j-scopus
dc.date.accessioned 2022-03-21T08:23:45Z
dc.date.available 2022-03-21T08:23:45Z
dc.description.sponsorship RP/CPS/2022/007; IGA/FT/2022/004; Ministerstvo Školství, Mládeže a Tělovýchovy, MŠMT; Vysoké Učení Technické v Brně, BUT: FEKT-S-20-6215
dc.rights Attribution 4.0 International
dc.rights.uri https://creativecommons.org/licenses/by/4.0/
dc.rights.access openAccess
utb.ou Department of Physics and Materials Engineering
utb.ou Centre of Polymer Systems
utb.ou Department of Food Analysis and Chemistry
utb.ou Department of Fat, Surfactant and Cosmetics Technology
utb.ou Polymer Centre
utb.contributor.internalauthor Adámek, Martin
utb.contributor.internalauthor Matyáš, Jiří
utb.contributor.internalauthor Adámková, Anna
utb.contributor.internalauthor Mlček, Jiří
utb.contributor.internalauthor Černeková, Martina
utb.contributor.internalauthor Ševčíková, Veronika
utb.contributor.internalauthor Zvonková, Magdaléna
utb.contributor.internalauthor Slobodian, Petr
utb.contributor.internalauthor Olejník, Robert
utb.fulltext.affiliation Martin Adamek 1,2, Jiri Matyas 3,* https://orcid.org/0000-0002-6554-4485 , Anna Adamkova 4 https://orcid.org/0000-0003-2692-9670 , Jiri Mlcek 4, Martin Buran 2, Martina Cernekova 5, Veronika Sevcikova 4 https://orcid.org/0000-0002-8966-2435 , Magdalena Zvonkova 4, Petr Slobodian 3,6 https://orcid.org/0000-0003-4771-8928 and Robert Olejnik 3 1 Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, 760 01 Zlin, Czech Republic; [email protected] 2 Department of Microelectronics, Faculty of Electrical Engineering and Communication, Brno University of Technology, Technicka, 3058/10, 616 00 Brno, Czech Republic; [email protected] 3 Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Trida Tomase Bati, 5678, 760 01 Zlin, Czech Republic; [email protected] (P.S.); [email protected] (R.O.) 4 Department of Food Analysis and Chemistry, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, 760 01 Zlin, Czech Republic; [email protected] (A.A.); [email protected] (J.M.); [email protected] (V.S.); [email protected] (M.Z.) 5 Department of Fat, Surfactant and Cosmetics Technology, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, 760 01 Zlin, Czech Republic; [email protected] 6 Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, 760 01 Zlin, Czech Republic * Correspondence: [email protected]
utb.fulltext.dates Received: 10 January 2022 Accepted: 1 March 2022 Published: 3 March 2022
utb.fulltext.sponsorship This article was supported by the Internal Grant Agency of Tomas Bata University in Zlín (No. IGA/FT/2022/004) and project Brno University of Technology in Brno (FEKT-S-20-6215). This research was also funded by the Ministry of Education, Youth and Sports of the Czech Republic— DKRVO (RP/CPS/2022/007).
utb.wos.affiliation [Adamek, Martin] Tomas Bata Univ Zlin, Fac Technol, Dept Phys & Mat Engn, Vavreckova 275, Zlin 76001, Czech Republic; [Adamek, Martin; Buran, Martin] Brno Univ Technol, Fac Elect Engn & Commun, Dept Microelect, Tech 3058-10, Brno 61600, Czech Republic; [Matyas, Jiri; Slobodian, Petr; Olejnik, Robert] Tomas Bata Univ Zlin, Univ Inst, Ctr Polymer Syst, Trida Tomase Bati 5678, Zlin 76001, Czech Republic; [Adamkova, Anna; Mlcek, Jiri; Sevcikova, Veronika; Zvonkova, Magdalena] Tomas Bata Univ Zlin, Fac Technol, Dept Food Anal & Chem, Vavreckova 275, Zlin 76001, Czech Republic; [Cernekova, Martina] Tomas Bata Univ Zlin, Fac Technol, Dept Fat Surfactant & Cosmet Technol, Vavreckova 275, Zlin 76001, Czech Republic; [Slobodian, Petr] Tomas Bata Univ Zlin, Fac Technol, Ctr Polymer, Vavreckova 275, Zlin 76001, Czech Republic
utb.scopus.affiliation Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, Zlin, 760 01, Czech Republic; Department of Microelectronics, Faculty of Electrical Engineering and Communication, Brno University of Technology, Technicka, 3058/10, Brno, 616 00, Czech Republic; Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Trida Tomase Bati, 5678, Zlin, 760 01, Czech Republic; Department of Food Analysis and Chemistry, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, Zlin, 760 01, Czech Republic; Department of Fat, Surfactant and Cosmetics Technology, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, Zlin, 760 01, Czech Republic; Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, Vavreckova, 275, Zlin, 760 01, Czech Republic
utb.fulltext.projects IGA/FT/2022/004
utb.fulltext.projects FEKT-S-20-6215
utb.fulltext.projects RP/CPS/2022/007
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty University Institute
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Food Analysis and Chemistry
utb.fulltext.ou Department of Fat, Surfactant and Cosmetics Technology
utb.fulltext.ou Polymer Centre
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam

Attribution 4.0 International Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Attribution 4.0 International