Publikace UTB
Repozitář publikační činnosti UTB

A potential use of the balanced tuning method for the control of a class of time-delay systems

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title A potential use of the balanced tuning method for the control of a class of time-delay systems en
dc.contributor.author Pekař, Libor
dc.contributor.author Gazdoš, František
dc.relation.ispartof Proceedings of the 2019 22nd International Conference on Process Control, PC 2019
dc.identifier.isbn 978-1-72813-758-2
dc.date.issued 2019
dc.citation.spage 161
dc.citation.epage 166
dc.event.title 22nd International Conference on Process Control, PC 2019
dc.event.location Štrbské Pleso
utb.event.state-en Slovakia
utb.event.state-cs Slovensko
dc.event.sdate 2019-06-11
dc.event.edate 2019-06-14
dc.type conferenceObject
dc.language.iso en
dc.publisher Institute of Electrical and Electronics Engineers Inc.
dc.identifier.doi 10.1109/PC.2019.8815055
dc.relation.uri https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8815055
dc.subject balanced tuning en
dc.subject compensator en
dc.subject PID controller en
dc.subject Smith predictor en
dc.subject time-delay systems en
dc.description.abstract This preliminary study aims to verify and present a possible utilization of one of modern proportional-integral-derivative (PID) controller tuning approaches-the balanced (equalization) method-applied to a selected class of stable systems with delays. We first use an elegant algebraic compensation method to get the controller structure of an infinite dimension. It is, moreover, shown that this class of controllers matches the famous Smith predictor. Then, finite-dimensional controllers are derived via a simple approximation. The balanced tuning method is eventually applied to these reduced PID control laws. Since such a tuning does not meet a priori requirements, a modified controller parameters' setting fixing it is used to get comparative results. Moreover, these settings are confronted by simulations with another well-established method and also to the direct use of a PID controller without delay compensation. Selected perturbation serves to test and verify the robustness of designed controllers. © 2019 IEEE. en
utb.faculty Faculty of Applied Informatics
dc.identifier.uri http://hdl.handle.net/10563/1009121
utb.identifier.obdid 43880047
utb.identifier.scopus 2-s2.0-85072521620
utb.identifier.wok 000539039300029
utb.source d-scopus
dc.date.accessioned 2019-10-21T15:10:38Z
dc.date.available 2019-10-21T15:10:38Z
utb.ou CEBIA-Tech
utb.contributor.internalauthor Pekař, Libor
utb.contributor.internalauthor Gazdoš, František
utb.fulltext.affiliation Libor Pekař, František Gazdoš Faculty of Applied Informatics Tomas Bata University in Zlín Zlín, Czech Republic [email protected] Faculty of Applied Informatics Tomas Bata University in Zlín Zlín, Czech Republic [email protected]
utb.fulltext.dates -
utb.fulltext.sponsorship The work was supported by the Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme project no. LO1303 (MSMT-7778/2014) and by the European Regional Development Fund under the project CEBIA‐Tech No. CZ.1.05/2.1.00/03.0089.
utb.wos.affiliation [Pekar, Libor; Gazdos, Frantisek] Tomas Bata Univ Zlin, Fac Appl Informat, Zlin, Czech Republic[Pekar, Libor; Gazdos, Frantisek] Tomas Bata Univ Zlin, Fac Appl Informat, Zlin, Czech Republic
utb.scopus.affiliation Faculty of Applied Informatics, Tomas Bata University in Zlín, Zlín, Czech Republic
utb.fulltext.projects LO1303
utb.fulltext.projects MSMT-7778/2014
utb.fulltext.projects CZ.1.05/2.1.00/03.0089
utb.fulltext.faculty Faculty of Applied Informatics
utb.fulltext.faculty Faculty of Applied Informatics
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam