Publikace UTB
Repozitář publikační činnosti UTB

Preparation of textured surfaces on aluminum-alloy substrates

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Preparation of textured surfaces on aluminum-alloy substrates en
dc.contributor.author Kadlečková, Markéta
dc.contributor.author Minařík, Antonín
dc.contributor.author Smolka, Petr
dc.contributor.author Mráček, Aleš
dc.contributor.author Wrzecionko, Erik
dc.contributor.author Novák, Libor
dc.contributor.author Musilová, Lenka
dc.contributor.author Gajdošík, Radek
dc.relation.ispartof Materials
dc.identifier.issn 1996-1944 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2019
utb.relation.volume 12
utb.relation.issue 1
dc.type article
dc.language.iso en
dc.publisher MDPI AG
dc.identifier.doi 10.3390/ma12010109
dc.relation.uri https://www.mdpi.com/1996-1944/12/1/109
dc.subject aluminum en
dc.subject alloy en
dc.subject duralumin en
dc.subject etching en
dc.subject surface texture en
dc.subject porous-like en
dc.subject adhesive bonding en
dc.subject superhydrophobic en
dc.description.abstract The ways of producing porous-like textured surfaces with chemical etching on aluminum-alloy substrates were studied. The most appropriate etchants, their combination, temperature, and etching time period were explored. The influence of a specifically textured surface on adhesive joints' strength or superhydrophobic properties was evaluated. The samples were examined with scanning electron microscopy, profilometry, atomic force microscopy, goniometry, and tensile testing. It was found that, with the multistep etching process, the substrate can be effectively modified and textured to the same morphology, regardless of the initial surface roughness. By selecting proper etchants and their sequence one can prepare new types of highly adhesive or even superhydrophobic surfaces. © 2018 by the authors. en
utb.faculty Faculty of Technology
utb.faculty University Institute
dc.identifier.uri http://hdl.handle.net/10563/1008437
utb.identifier.obdid 43879728
utb.identifier.scopus 2-s2.0-85059347699
utb.identifier.wok 000456410200109
utb.identifier.pubmed 30602667
utb.source j-scopus
dc.date.accessioned 2019-07-08T11:59:38Z
dc.date.available 2019-07-08T11:59:38Z
dc.description.sponsorship Ministry of Education, Youth, and Sports of the Czech Republic-Program NPU I [LO1504]; European Regional Development Fund [CZ.1.05/2.1.00/19.0409]; TBU grant [IGA/FT/2017/011, IGA/FT/2018/011]
dc.rights Attribution 4.0 International
dc.rights.uri https://creativecommons.org/licenses/by/4.0/
dc.rights.access openAccess
utb.ou Centre of Polymer Systems
utb.contributor.internalauthor Kadlečková, Markéta
utb.contributor.internalauthor Minařík, Antonín
utb.contributor.internalauthor Smolka, Petr
utb.contributor.internalauthor Mráček, Aleš
utb.contributor.internalauthor Wrzecionko, Erik
utb.contributor.internalauthor Novák, Libor
utb.contributor.internalauthor Musilová, Lenka
utb.contributor.internalauthor Gajdošík, Radek
utb.fulltext.affiliation Markéta Kadlečková 1,2, Antonín Minařík 1,2*, Petr Smolka 1,2, Aleš Mráček 1,2, Erik Wrzecionko 1,2, Libor Novák 1, Lenka Musilová 1,2, Radek Gajdošík 1 1 Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 275, 760 01 Zlín, Czech Republic; [email protected] (M.K.); [email protected] (P.S.); [email protected] (A.M.); [email protected] (E.W.); [email protected] (L.N.); [email protected] (L.M.); [email protected] (R.G.) 2 Centre of Polymer Systems, Tomas Bata University in Zlín, Třída Tomáše Bati 5678, 76001 Zlín, Czech Republic * Correspondence: [email protected]; Tel.: +420-57-603-5086
utb.fulltext.dates Received: 30 November 2018 Accepted: 25 December 2018 Published: 31 December 2018
utb.wos.affiliation [Kadleckova, Marketa; Minarik, Antonin; Smolka, Petr; Mracek, Ales; Wrzecionko, Erik; Novak, Libor; Musilova, Lenka; Gajdosik, Radek] Tomas Bata Univ Zlin, Fac Technol, Dept Phys & Mat Engn, Vavreckova 275, Zlin 76001, Czech Republic; [Kadleckova, Marketa; Minarik, Antonin; Smolka, Petr; Mracek, Ales; Wrzecionko, Erik; Musilova, Lenka] Tomas Bata Univ Zlin, Ctr Polymer Syst, Trida Tomase Bati 5678, Zlin 76001, Czech Republic
utb.scopus.affiliation Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 275, Zlín, 760 01, Czech Republic; Centre of Polymer Systems, Tomas Bata University in Zlín, Třída Tomáše Bati 5678, Zlín, 76001, Czech Republic
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Department of Physics and Materials Engineering
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Physics and Materials Engineering
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam

Attribution 4.0 International Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Attribution 4.0 International