Mechanical properties study of high impact polystyrene under impact and static tests

Hýlová, Lenka; Mizera, Aleš; Mizera, Martin; Grund, Roman; Ovsík, Martin

dc.title	Mechanical properties study of high impact polystyrene under impact and static tests	en
dc.contributor.author	Hýlová, Lenka
dc.contributor.author	Mizera, Aleš
dc.contributor.author	Mizera, Martin
dc.contributor.author	Grund, Roman
dc.contributor.author	Ovsík, Martin
dc.relation.ispartof	IOP Conference Series: Materials Science and Engineering
dc.identifier.issn	1757-8981 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2018
utb.relation.volume	448
utb.relation.issue	1
dc.event.title	23rd International Conference on Manufacturing, Manufacturing 2018
dc.event.location	Kecskemét
utb.event.state-en	Hungary
utb.event.state-cs	Maďarsko
dc.event.sdate	2018-06-07
dc.event.edate	2018-06-08
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Institute of Physics Publishing
dc.identifier.doi	10.1088/1757-899X/448/1/012044
dc.relation.uri	http://iopscience.iop.org/article/10.1088/1757-899X/448/1/012044
dc.description.abstract	This article deals with the study of high impact polystyrene (HIPS) mechanical properties. Injection moulded samples were subjected to the tensile impact test, tensile test, impact test - Charpy and three-point bending test at the ambient temperature. Tensile test was measured at two crosshead speeds 50 and 500 mm/min and bending test at 2 and 50 mm/min. The results show the great adaptability of HIPS which classify this material to the group of very well adaptable polymers to different loadings. © Published under licence by IOP Publishing Ltd.	en
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1008401
utb.identifier.rivid	RIV/70883521:28140/18:63520217!RIV19-MSM-28140___
utb.identifier.rivid	RIV/70883521:28110/18:63520217!RIV19-MPO-28110___
utb.identifier.rivid	RIV/70883521:28110/18:63520217!RIV19-MSM-28110___
utb.identifier.obdid	43878807
utb.identifier.scopus	2-s2.0-85058371862
utb.identifier.wok	000467870800044
utb.source	d-scopus
dc.date.accessioned	2019-01-31T08:58:59Z
dc.date.available	2019-01-31T08:58:59Z
dc.description.sponsorship	European Regional Development Fund under the project CEBIA-Tech Instrumentation [CZ.1.05/2.1.00/19.0376]; Czech Ministry of Industry and Trade in Program "Aplikace" [CZ 01.1.02/0.0/0.0/16_084/0009949]; Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Program [LO1303/MSMT-7778/2014]; Internal Grant Agency of TBU in Zlin [IGA/FT/2018/012]
utb.contributor.internalauthor	Hýlová, Lenka
utb.contributor.internalauthor	Mizera, Aleš
utb.contributor.internalauthor	Mizera, Martin
utb.contributor.internalauthor	Ovsík, Martin
utb.fulltext.affiliation	L Hýlová 1, A Mizera 1, M Mizera 1, R Grund 2, M Ovsík 1 1 Tomas Bata University in Zlín, nám. T.G. Masaryka 5555, 760 01 Zlín, Czech Republic 2 TREVOS a.s., Mašov 34, 511 01 Trutnov, Czech Republic [email protected]
utb.fulltext.dates	-
utb.scopus.affiliation	Tomas Bata University in Zlín, Nám. T.G. Masaryka 5555, Zlín, 760 01, Czech Republic; TREVOS A.s., Mašov 34, Trutnov, 511 01, Czech Republic