Electrochemically induced charge injection in disordered organic conductive polymers

Abstract

This paper deals with the electrochemically induced charge injection in the conductive polymer (CP), exemplified by well examined archetypal CP-poly(3-hexylthiophene-2,5-diyl). The polar solvent of acetonitrile with salt tetrabutylammonium hexafluorophosphate was used to transport electrons in the electrolyte. The decisive mechanism is the recombination current at the electrolyte/CP interface taking place at the Fermi energy of CP, whose energy position is determined by the externally applied voltage. The corresponding mechanism of the charge carrier transport in the polymer bulk is the space-charge limited current (SCLC) by holes or electrons (or more precisely positive and negative polarons) at the respective transport paths of HOMO and LUMO bands. The charge transport mechanisms and the occupation statistics are the basis of the energy-resolved electrochemical impedance spectroscopy for the mapping of the density of electronic states of conductive organic semiconductors [F. Schauer, V. Nadazdy, and K. Gmucova, J. Appl. Phys. 123, 161590 (2018)]. From the application point of view, the major message of the paper is that it is possible to pass high current densities of the order of 0.1 A cm(-2) via electrochemical systems with the CP, induced by means of doping processes of both CP surface and its bulk, leading to the charge injection and SCLC in CP. Published by AIP Publishing.