Comparative analysis of Six Sigma belt roles deployment in SMEs and large enterprises

Stankalla, Roland; Chromjaková, Felicita

dc.title	Comparative analysis of Six Sigma belt roles deployment in SMEs and large enterprises	en
dc.contributor.author	Stankalla, Roland
dc.contributor.author	Chromjaková, Felicita
dc.relation.ispartof	Finance and the Performance of Firms in Science, Education and Practice 2017
dc.identifier.isbn	978-80-7454-653-2
dc.date.issued	2017
dc.citation.spage	1009
dc.citation.epage	1020
dc.event.title	6th International Scientific Conference on Finance and the Performance of Firms in Science, Education, and Practice
dc.event.location	Zlín
utb.event.state-en	Czech Republic
utb.event.state-cs	Česká republika
dc.event.sdate	2017-04-26
dc.event.edate	2017-04-27
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Univerzita Tomáše Bati ve Zlíně (UTB)	cs
dc.publisher	Tomas Bata University in Zlín	en
dc.relation.uri	http://www.ufu.utb.cz/konference/
dc.relation.uri	http://www.ufu.utb.cz/konference/sbornik2017.pdf
dc.subject	Six Sigma Belts	en
dc.subject	philosophy	en
dc.subject	analysis	en
dc.subject	SMEs	en
dc.subject	Lean Six Sigma	en
dc.description.abstract	Six Sigma methodology brings a lot of possibilities, how to radical improve process and product quality. Since a decade the pressure started rising throughout the world that SMEs can enhance their capability, improve quality and increase their profitability by using Six Sigma. However, Six sigma used by large organization cannot be adopted for SMEs. There are too many differences between this two company types. In presented paper actual theoretical fundamentals of SS belt roles are analyzed and by a comparative analysis core research questions connecting to differences of SS belt roles deployment in SMEs and large enterprises are answered. Also deployment guidelines for SS belt roles in SMEs are highlighted.	en
utb.faculty	Faculty of Management and Economics
dc.identifier.uri	http://hdl.handle.net/10563/1008282
utb.identifier.obdid	43878190
utb.identifier.wok	000471174000079
utb.source	d-orig
dc.date.accessioned	2018-11-19T13:51:03Z
dc.date.available	2018-11-19T13:51:03Z
utb.contributor.internalauthor	Stankalla, Roland
utb.contributor.internalauthor	Chromjaková, Felicita
utb.fulltext.affiliation	Stankalla Roland, Chromjakova Felicita Contact information Roland Stankalla, M.Sc., M.Sc Prof. Dr.-Ing. Felicita Chromjakova Department of Industrial Engineering and Information Systems Faculty of Management and Economics Tomas Bata University in Zlin, Mostni 5139, 760 01 Zlin Email: [email protected]
utb.fulltext.dates	-
utb.fulltext.references	1. Albliwi S. A., Antony J., and Lim S. A. H.: A systematic review of Lean Six Sigma for the manufacturing industry. Business Process Management Journal, 2015, Vol. 21 Iss 3 pp. 665- 691. 2. Antony J. and Taner T.: A conceptual framework for the effective implementation of statistical process control. Business Process Management Journal, 2003, 9 (4), 473–489. 3. British Standards Institute (BSI): BS ISO 13053 – 1:2011. Quantitative Methods in Process Improvement – Six Sigma. Part 1 DMAIC Methodology, 2011, BSI, London. 4. Burton T.: “Six Sigma for small and medium sized businesses”, 2004. Retrieved on February 18, 2017 from https://www.isixsigma.com/implementation/basics/six-sigma-small-and-medium-sized-businesses/ 5. Cauchick M. and Marcos A.: Benchmarking Six Sigma application in Brazil: Best practices in the use of the methodology, Benchmarking. An International Journal, 2009, Vol. 16 Iss: 1, pp.124 – 134. 6. Chakrabarty A. and Tan K. C.: The current state of six sigma application in services. Managing Service Quality, 2007, 17 (2), 194-208. 7. Chakrabarty A. and Chuan T. K.: An exploratory qualitative and quantitative analysis of Six Sigma in service organizations in Singapore. Management Research News, 2009, 32, 614–632. 8. Corbett L. M.: Lean Six Sigma: The contribution to business excellence. International Journal of Lean Six Sigma, 2011, 2(2), 118-131. 9. Deshmukh S.V. and Lakhe R.R.: Development and validation of an instrument for Six Sigma implementation in small and medium sized enterprises. IEEE Second International Conference on Emerging Trends in Engineering and Technology (ICETET-09), 2009, 16-18, pp. 790-797. 10. Feng Q. and Manuel C.M.: Under the knife: A national survey of six sigma programs in US healthcare organizations. International Journal of Health Care Quality Assurance, 2008,Vol. 21, no. 6, p. 535. 11. Galloway R. M.: Six Sigma implementation: An empirical analysis of critical success factors and performance outcomes. 2008. Retrieved on February 18, 2017 from https://pdfs.semanticscholar.org/d3a9/76f9ce1eb4 b8df4a1e9b498f006ebc4af6f0.pdf 12. Harry M. J.: Six Sigma: A breakthrough strategy for profitability. Quality Progress, 1998, pp. 60-4. 13. Harry M. J. and Crawford D.: Six Sigma for the little guy. Mechanical Engineering Magazine. 2004. 14. Harry M. and Schroeder R.: Six Sigma: The Breakthrough Management Strategy Revolutionizing the World's Top Corporations, 2000, Doubleday Currency, New York, NY. 15. iSixSigma: Six Sigma Roles and Responsibilities. Retrieved on February 18, 2017 from https://www.isixsigma.com/new-to-six-sigma/roles-responsibilities/six-sigma-roles-and-responsibilities/ 16. Jesus A. R. D., Antony J., Lepikson H. A., Cavalcante C. A. M. T.: Key observations from a survey about Six Sigma implementation in Brazil. International Journal of Productivity and Performance Management, 2015, Vol. 64 Iss 1 pp. 94 – 111. 17. Korn Consult: Six Sigma White Belt Training. Retrieved on February 18, 2017 from http://korn-consult.com/de/artikel/six-sigma-white-belt-training 18. Korn Consult: Six Sigma Yellow Belt Training. Retrieved on February 18, 2017 from http://korn-consult.com/de/artikel/six-sigma-yellow-belt-training 19. Kubiak T. M.: Six Sigma in the 21st century. Six Sigma Forum Magazine, 2011, Vol. 11. No. 1. ASQ. 20. Kumar M., Antony J., Singh R. K., Tiwari M. K., Perry D.: Implementing the Lean Sigma framework in an Indian SME: A case study. Production Planning and Control, 2006, 17 (4), 407–423. 21. Kumar M., Antony J., Madu C. N., Montgomery D. C., Park S. H. (a): Common myths of Six Sigma demystified. International Journal of Quality and Reliability Management, 2008, 25 (8), 878–895. 22. Kumar M., Antony J., Labib A. (b): Gearing Six Sigma into UK manufacturing SMEs: results from a pilot study. Operational Research Society, 2008, 59, 482 - 493. 23. Kumar M. and Antony J.: Comparing the quality management practices in UK SMEs. Industrial Management and Data Systems, 2008, 108 (9), 1153–1166. 24. Kumar M., Anthony J., Tiwari, M.K.: Six Sigma implementation framework for SMEs – a roadmap to manage and sustain the change. International Journal of Production Research, 2011, Vol. 49, No. 18, 5449–5467. 25. Kumar S.: Impact of Six sigma DMAIC approach on Manufacturing Industries. International Journal of Innovative Research in Science Engineering and Technology, 2014, Vol. 3, No. 5. 26. Kwaka Y.H., Anbari F.T.: Benefits, Obstacles, and Future of Six Sigma Approach. Technovation, 2006, 26 (5-6): 708-715. 27. Kaushik P., Khanduja D., Mittal K., and Jaglan P.: A case study: Application of Six Sigma methodology in a small and medium-sized manufacturing enterprise. The TQM Journal, 2012, Vol. 24 Iss 1 pp. 4 – 16. 28. Leyendecker B., Schindewolf S., Hutwelker R., Weigel H.: Erfolgsfaktoren für die Etablierung von Six Sigma: Bei guter Führung wertvoll. QZ Qualität und Zuverlässigkeit, 2011, (07), 29-33. 29. Maleyeff J., Arnheiter E. A., Venkateswaran V.: The continuing evolution of lean six sigma. The TQM Journal, 2012, 24(6), 542-555. 30. Marzagao D. S. L. and Carvalho M. M.: Critical success factors for Six Sigma Projects. International Journal of Project Management, 2016, 34 (8), pp. 1505-1518. 31. McCarty T.: The Six Sigma Black Belt Handbook. New York, NY: McGraw-Hill Companies, Inc. 2005. 32. Montgomery D. C. and William H. W.: An overview of Six Sigma. International Statistical Review, 2008, 76 (3), 329-346. 33. Monteiro de Carvalho M., Lee Ho L., Helena Boarin Pinto S.: The Six Sigma Program: An empirical study of Brazilian companies. Journal of Manufacturing Technology Management, 2014, 25 (5): pp. 602-630. 34. Nave D.: How to compare six sigma, lean and the theory of constraints. Quality Progress, 2002, Vol. 35 No. 3, pp. 73. 35. Porter L.: Six Sigma Excellence. Quality World, 2002. 36. Pulakanam V. and Voges K.E.: Adoption of Six Sigma: Review of empirical research. International Review of Business Research Papers, 2010, Vol. 6 No. 5, pp. 149-163. 37. Pyzdek T.: The Six Sigma handbook. A complete Guide for Green Belts, Black Belts, and Managers at All Levels. New York, USA: McGraw-Hill. 2003. 38. Raghunath A. and Jayathirtha R. V.: Lean Six Sigma approach for auto component manufacturing SMEs. Proceedings of International Simulation Conference of India, IITM Research Park, Indian Institute of Technology Madras, 2013a. 39. Raghunath A. and Jayathirtha R. V.: Critical Success Factors for Six Sigma implementation by SMEs. International Journal of Scientific and Engineering, 2013b, 4.2. 40. Rowlands H.: Implementation issues of Six Sigma in an SME. First International Conference on Six Sigma, 2004, Vol. 16. 41. Richardson K.: The Six Sigma factor for home depot. CHANGE 40, 2007, 0-26. 42. Sheridan J.H.: Lean Sigma synergy. Industry Week, 2000, Vol. 249 No. 17, pp. 81-2. 43. Snee R.D.: Six Sigma: The evolution of 100 years of business improvement methodology. International Journal of Six Sigma and Competitive Advantage, 2004, Vol. 1 No. 1, pp. 4-20. 44. Snee R.D.: Lean Six Sigma – getting better all the time. International Journal of Lean Six Sigma, 2010, Vol. 1, No. 1. pp. 9-29. 45. Timans W., Antony, J., Ahaus, K., van Solingen, R.: Implementation of Lean Six Sigma in small- and médium-sized manufacturing enterprises in the Netherlands. Journal of the Operational Research Society, 2012, 63. Jg., Nr. 3. pp. 339-353. 46. Timans W.: Continuous quality improvement based on Lean Six Sigma in manufacturing small and medium sized enterprises (Doctoral dissertation, University of Groningen). 2014. 47. Wessel G. and Burcher P.: Six Sigma for small and medium-sized enterprises. The TQM Magazine, 2004, Vol. 16 No. 4, pp. 264-72. 48. Zabel M.: Getting Belted – A quick guide to the common Six Sigma „Belts“. 2007.
utb.fulltext.sponsorship	Greatest challenges that can be seen by successful implementation of Industry 4. 0 (according to the results realized in the framework of our survey in RVO project: “Parameters modelling for effective production and administrative processes in industrial companies based on Industry 4.0 concept”.
utb.wos.affiliation	[Roland, Stankalla; Felicita, Chromjakova] Tomas Bata Univ Zlin, Fac Management & Econ, Dept Ind Engn & Informat Syst, Mostni 5139, Zlin 76001, Czech Republic
utb.identifier.jel	L60
utb.identifier.jel	L15
utb.identifier.jel	L25