Bacterial cellulose based greener packaging material: A bioadhesive polymeric film

Bandyopadhyay, Smarak; Saha, Nabanita; Brodnjak, Urška Vrabič; Sáha, Petr

dc.title	Bacterial cellulose based greener packaging material: A bioadhesive polymeric film	en
dc.contributor.author	Bandyopadhyay, Smarak
dc.contributor.author	Saha, Nabanita
dc.contributor.author	Brodnjak, Urška Vrabič
dc.contributor.author	Sáha, Petr
dc.relation.ispartof	Materials Research Express
dc.identifier.issn	2053-1591 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2018
utb.relation.volume	5
utb.relation.issue	11
dc.type	article
dc.language.iso	en
dc.publisher	Institute of Physics Publishing
dc.identifier.doi	10.1088/2053-1591/aadb01
dc.relation.uri	https://iopscience.iop.org/article/10.1088/2053-1591/aadb01/meta
dc.subject	bacterial cellulose	en
dc.subject	bioadhesion	en
dc.subject	colour and chroma	en
dc.subject	porosity	en
dc.description.abstract	Conventional polymer-based packaging material (polyethylene, polypropylene) has several harmful effects on the ecological aspect as well as human well beings. Thus an eco-friendly alternative to reduce/solve the problem is desirable. Bacterial cellulose (BC) is the purest form of cellulose available from microbes. A wide range of application of BC is reported, from packaging to health care, mainly due to its biodegradability and biocompatibility. In the present paper, the emphasis has been given to characterize and compare the physicomechanical properties of BC-based polymeric films with 'Neat BC' film. The BC based polymeric films are designated as 'PVP-BC' and 'PVP-CMC-BC' as polyvinylpyrrolidone (PVP) and carboxymethyl cellulose (CMC) are present as a base polymer. Structural (morphology, porosity, XRD and optical properties), mechanical and bioadhesive properties were analyzed. The results revealed that 'PVP-CMC-BC' film has better tensile strength but lowest elastic properties among the three test samples. The 'PVP-CMC-BC' film can be stretched longer than others with the highest deformation rate. All the films are glossier on the lower side than the upper side of the films due to the evaporation of water from the upper surface of the film in the casting tray. 'PVP-CMC-BC' film is a bit more yellowish than the other two samples. All the films (air dry state) have shown air transmittance resistance even at an air pressure of 5 ml/50 mm, as in the air dry state the porous structure of hydrogel films disappears. Though elasticity and deformation are a prerequisite for selection of food packaging material, due to better tensile properties, transparent nature, printability 'PVP-CMC-BC' film is considered as the best and a novel green packaging material. It can be recommended for food packaging application which will be less expensive, recyclable/biodegradable, sustainable and alternative to the conventional food packaging material. © 2018 IOP Publishing Ltd.	en
utb.faculty	University Institute
dc.identifier.uri	http://hdl.handle.net/10563/1008206
utb.identifier.obdid	43879676
utb.identifier.scopus	2-s2.0-85053337482
utb.identifier.wok	000444314900005
utb.source	j-scopus
dc.date.accessioned	2018-10-03T11:13:02Z
dc.date.available	2018-10-03T11:13:02Z
dc.description.sponsorship	Internal Grant Agency, Tomas Bata University in Zlin, Czech Republic [IGA/CPS/2018/008]; Ministry of Education, Youth& Sports of the Czech Republic-NPU Program I [LO1504]; COST Action [CA15216_ENBA]
utb.ou	Centre of Polymeric Systems
utb.contributor.internalauthor	Bandyopadhyay, Smarak
utb.contributor.internalauthor	Saha, Nabanita
utb.contributor.internalauthor	Sáha, Petr
utb.fulltext.affiliation	Smarak Bandyopadhyay 1 , Nabanita Saha 1 , Urška Vrabič Brodnjak 2 and Petr Saha 1 1 Centre of Polymeric Systems, University Institute, Tomas Bata University in Zlin, Tř. T. Bati 5678, 760 01, Zlin, Czechia 2 The University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles Graphic Arts and Design, Snežniška 5, SI 1000 Ljubljana, Slovenia E-mail: [email protected]
utb.fulltext.dates	RECEIVED 5 July 2018 REVISED 2 August 2018 ACCEPTED FOR PUBLICATION 17 August 2018 1 PUBLISHED 12 September 2018
utb.fulltext.references	[1] Trinetta V 2016 Definition and function of food packaging Reference Module in Food Science (Amsterdam: Elsevier) (https://doi.org/10.1016/B978-0-08-100596-5.03319-9) [2] Youssef A M and El-Sayed S M 2018 Bionanocomposites materials for food packaging applications: concepts and future outlook Carbohydrate Polymers 193 19–27 [3] Gómez-Guillén M C, Pérez-Mateos M, Gómez-Estaca J, López-Caballero E, Giménez B and Montero P 2009 Fish gelatin: a renewable material for developing active biodegradable films Trends in Food Science & Technology 20 3–16 [4] Marsh K and Bugusu B 2007 Food packaging—roles, materials, and environmental issues Journal of Food Science 72 R39–55 [5] Kirwan M J 2011 paper and paperboard packaging Food and Beverage Packaging Technology ed R Coles and M J Kirwan (Oxford: Blackwell Publications) pp 213–50 [6] Lau O-W and Wong S-K 2000 Contamination in food from packaging material Journal of Chromatography A 882 255–70 [7] Lasut M T, Weber M, Pangalila F, Rumampuk N D C, Rimper J R T S L, Warouw V, Kaunang S T and Lott C 2018 From coral triangle to trash triangle—how the hot spot of global marine biodiversity is threatened by plastic waste Proc. of the Int. Conf. on Microplastic Pollution in the Mediterranean Sea (Springer Water) pp 107–13 [8] Rochman C M, Hoh E, Kurobe T and Teh S J 2013 Ingested plastic transfers hazardous chemicals to fish and induces hepatic stress Sci. Rep. 3 3263 [9] Lasut M T, Weber M, Pangalila F, Rumampuk N D C, Rimper J R T S L, Warouw V, Kaunang S T and Lott C 2018 From Coral Triangle to Trash Triangle—How the Hot spot of Global Marine Biodiversity Is Threatened by Plastic Waste Proc. of the Int. Conf. on Microplastic Pollution in the Mediterranean Sea (Springer Water) pp 107–13 [10] Luckachan G E and Pillai C K S 2011 Biodegradable polymers- a review on recent trends and emerging perspectives J Polym Environ 19 637–76 [11] Tang X Z, Kumar P, Alavi S and Sandeep K P 2012 Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials Crit Rev Food Sci Nutr 52 426–42 [12] Imran M, Revol-Junelles A-M, Martyn A, Tehrany E A, Jacquot M, Linder M and Desobry S 2010 Active food packaging evolution: transformation from micro- to nanotechnology Critical Reviews in Food Science and Nutrition 50 799–821 [13] Singh P, Saengerlaub S, Abas Wani A and Langowski H 2012 Role of plastics additives for food packaging Pigment & Resin Technology 41 368–79 [14] Robertson G L 2012 Food Packaging: Principles and Practice 3rd Edn (Boca Raton, FL: CRC Press) https://crcpress.com/Food- Packaging-Principles-and-Practice-Third-Edition/Robertson/p/book/9781439862414 [15] Lee S J and Rahman A T M M 2014 Intelligent packaging for food products Innovations in Food Packaging ed J H Han 2nd Edn (San Diego: Academic) ch 8 pp 171–209 [16] Feng X, Ullah N, Wang X, Sun X, Li C, Bai Y, Chen L and Li Z 2015 Characterization of bacterial cellulose by gluconacetobacter hansenii CGMCC 3917 Journal of Food Science 80 E2217–27 [17] Padrão J, Gonçalves S, Silva J P, Sencadas V, Lanceros-Méndez S, Pinheiro A C, Vicente A A, Rodrigues L R and Dourado F 2016 Bacterial cellulose-lactoferrin as an antimicrobial edible packaging Food Hydrocolloids 58 126–40 [18] Dongqing Z, Jiazhou L, Yuping X, Xin Z and Ronglin H 2011 Bacterial cellulose edible packaging product and production method thereof CN102211689A https://worldwide.espacenet.com/publicationDetails/biblio?CC=CN&NR=102211689A&KC=A&FT=D# [19] Park J K, Jung J Y and Khan T 2009 26-bacterial cellulose handbook of hydrocolloids Woodhead Publishing Series in Food Science, Technology and Nutrition 2nd edn (Sawston, Cambridge: Woodhead Publishing) pp 724–39 [20] Rudin A and Choi P 2013 Biopolymers The Elements of Polymer Science & Engineering 3rd edn (Boston: Academic) ch 13 pp 521–35 [21] Saha N, Shah R, Gupta P, Mandal B B, Alexandrova R, Sikiric M D and Saha P 2018 PVP - CMC hydrogel: an excellent bioinspired and biocompatible scaffold for osseointegration Materials Science and Engineering: C accepted (https://doi.org/10.1016/j.msec.2018.04.050) [22] Roy N, Saha N, Kitano T and Saha P 2012 Biodegradation of PVP–CMC hydrogel film: a useful food packaging material Carbohydrate Polymers 89 346–53 [23] Hestrin S and Schramm M 1954 Synthesis of cellulose by acetobacter xylinum. 2. Preparation of freeze-dried cells capable of polymerizing glucose to cellulose Biochem J 58 345–52 [24] Kourkoumelis N 2013 PowDLL, a reusable .NET component for interconverting powder diffraction data: recent developments Powder Diffraction 28 137–48 http://users.uoi.gr/nkourkou/powdll/ [25] McLaren K 2008 XIII—the development of the CIE 1976 (L * a * b * ) uniform colour space and colour-difference formula Journal of the Society of Dyers and Colourists 92 338–41 [26] International Organization for Standardization. ISO 8254–3 2016 paper and board - Measurement of specular gloss – Part 3: 20 degree gloss with a converging beam, TAPPI method. Retrieved from(https://iso.org/obp/ui/#iso:std:iso:8254:–3) ed-2:v1:en [27] Palacio M L B and Bhushan B 2012 Bioadhesion: a review of concepts and applications Phil. Trans. R. Soc. A 370 2321–47 [28] Mohamad N, Buang F, Lazim A M, Ahmad N, Martin C and Amin M C I M 2017 Characterization and biocompatibility evaluation of bacterial cellulose-based wound dressing hydrogel: effect of electron beam irradiation doses and concentration of acrylic acid Journal of Biomedical Materials Research Part B: Applied Biomaterials 105 2553–64 [29] Ataide J A, Carvalho N M, Rebelo M, de A, Chaud M V, Grotto D, Gerenutti M, Rai M, Mazzola P G and Jozala A F 2017 Bacterial nanocellulose loaded with bromelain: assessment of antimicrobial, antioxidant and physical-chemical properties Sci. Rep. 7 18031 [30] Shah R, Vyroubal R, Fei H, Saha N, Kitano T and Saha P 2015 Preparation of bacterial cellulose based hydrogels and their viscoelastic behavior AIP Conf. Proc . 1662 040007 [31] Sornkamnerd S, Okajima M K and Kaneko T 2017 Tough and porous hydrogels prepared by simple lyophilization of LC gels ACS Omega 2 5304–14 [32] Thomson M A 2015 Mid-IR Spectroscopy as a tool for cleanliness validation Developments in Surface Contamination and Cleaning ed R Kohli and K L Mittal (Oxford: William Andrew Publishing) ch 2 pp 51–67 [33] Gea S, Reynolds C T, Roohpour N, Wirjosentono B, Soykeabkaew N, Bilotti E and Peijs T 2011 Investigation into the structural, morphological, mechanical and thermal behaviour of bacterial cellulose after a two-step purification process Bioresource Technology 102 9105–10 [34] Roy N, Saha N, Kitano T and Saha P 2010 Novel hydrogels of PVP–CMC and their swelling effect on viscoelastic properties J. Appl. Polym. Sci. 117 1703–10 [35] Silverstein R M and Bassler G C 1962 Spectrometric identification of organic compounds J. Chem. Educ. 39 546 [36] Taokaew S, Seetabhawang S, Siripong P and Phisalaphong M 2013 Biosynthesis and characterization of nanocellulose-gelatin films Materials 6 782–94 [37] Olek W and Bonarski J 2006 Texture function application for wood ultrastructure description. Part 2: Application Wood Sci. Technol. 40 336 [38] Chai M N and Isa M I N 2013 The Oleic Acid Composition Effect on the Carboxymethyl Cellulose Based Biopolymer Electrolyte J. Crystallization Proc. Technol. 3 1–4 [39] Vrabič Brodnjak U 2017 Influence of ultrasonic treatment on properties of bio-based coated paper Progress in Organic Coatings 103 93–100 [40] Michalski M C, Desobry S and Hardy J 1997 Food materials adhesion: a review Crit Rev Food Sci Nutr 37 591–619 [41] Siracusa V 2012 Food packaging permeability behaviour: a report Int. J. Polymer Sci. 2012 11 [42] Biji K B, Ravishankar C N, Mohan C O and Srinivasa Gopal T K 2015 Smart packaging systems for food applications: a review J Food Sci Technol 52 6125–35 [43] Sandhya 2010 Modified atmosphere packaging of fresh produce: current status and future needs LWT - Food Science and Technology 43 381–92 [44] Roy N, Saha N, Humpolicek P and Saha P 2010 Permeability and biocompatibility of novel medicated hydrogel wound dressings Soft Materials 8 338–57
utb.fulltext.sponsorship	The authors are grateful to the Internal Grant Agency (Project No. IGA/CPS/2018/008), Tomas Bata University in Zlin, Czech Republic and to the Ministry of Education, Youth & Sports of the Czech Republic—NPU Program I (LO1504). Authors are happy to acknowledge the help and support of Dr Mirjam Leskovšek and Tomaž Stergar; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, Graphic Arts and Design during SEM measurement, operation of Instron and Ing. Milan Masař; Centre of Polymeric System, Tomas Bata University in Zlin, Czech Republic for XRD measurements. Moreover, the first author is thankful to COST Action CA15216_ENBA for providing the financial support to avail the Short Term Scientific Mission activity at the University of Ljubljana, Slovenia and giving the opportunity to conduct collaborative scientific experiments.
utb.scopus.affiliation	Centre of Polymeric Systems, University Institute, Tomas Bata University in Zlin, Tř. T. Bati 5678, Zlin, 760 01, Czech Republic; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles Graphic Arts and Design, Snežniška 5, Ljubljana, SI 1000, Slovenia
utb.fulltext.projects	IGA/CPS/2018/008
utb.fulltext.projects	LO1504
utb.fulltext.projects	CA15216_ENBA