Publikace UTB
Repozitář publikační činnosti UTB

Electrorheological behavior of iron(II) oxalate micro-rods

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Electrorheological behavior of iron(II) oxalate micro-rods en
dc.contributor.author Kutálková, Erika
dc.contributor.author Plachý, Tomáš
dc.contributor.author Osička, Josef
dc.contributor.author Cvek, Martin
dc.contributor.author Mrlík, Miroslav
dc.contributor.author Sedlačík, Michal
dc.relation.ispartof RSC Advances
dc.identifier.issn 2046-2069 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2018
utb.relation.volume 8
utb.relation.issue 44
dc.citation.spage 24773
dc.citation.epage 24779
dc.type article
dc.language.iso en
dc.publisher Royal Society of Chemistry
dc.identifier.doi 10.1039/c8ra03409e
dc.relation.uri http://pubs.rsc.org/en/Content/ArticleLanding/2018/RA/C8RA03409E#!divAbstract
dc.description.abstract Electrorheological (ER) fluids represent smart materials with extensive application potential due to their rheological properties which can be readily changed under an external electric field. In this study, the iron(ii) oxalate particles with rod-like morphology were successfully synthesized by the co-precipitation method using sulphate heptahydrate and oxalic acid dihydrate. The characterization of particles was performed via X-ray diffractometry and scanning electron microscopy. Subsequently, the ER fluids were prepared by dispersing the synthesized particles in silicone oil. The optical microscopy demonstrated the formation of chain-like particle structures upon the application of an electric field. Rheological properties were determined by means of rotational rheometry including creep-recovery experiments. The viscoelastic behavior of systems under investigation in the presence of the electric field was confirmed by the presence of recoverable strain of the system. © The Royal Society of Chemistry. en
utb.faculty University Institute
dc.identifier.uri http://hdl.handle.net/10563/1008100
utb.identifier.obdid 43879724
utb.identifier.scopus 2-s2.0-85050127759
utb.identifier.wok 000438939300010
utb.identifier.coden RSCAC
utb.source j-scopus
dc.date.accessioned 2018-08-03T12:49:40Z
dc.date.available 2018-08-03T12:49:40Z
dc.description.sponsorship LO1504, NPU, Northwestern Polytechnical University; MŠMT, Ministerstvo Školství, Mládeže a Tělovýchovy; CZ.1.05/2.1.00/19.0409, FEDER, European Regional Development Fund; FEDER, European Regional Development Fund; Research and Development
dc.rights Attribution-NonCommercial 3.0 International
dc.rights.uri https://creativecommons.org/licenses/by-nc/3.0/
dc.rights.access openAccess
utb.ou Centre of Polymer Systems
utb.contributor.internalauthor Kutálková, Erika
utb.contributor.internalauthor Plachý, Tomáš
utb.contributor.internalauthor Osička, Josef
utb.contributor.internalauthor Cvek, Martin
utb.contributor.internalauthor Mrlík, Miroslav
utb.contributor.internalauthor Sedlačík, Michal
utb.fulltext.affiliation E. Kutalkova, T. Plachy, J. Osicka, M. Cvek, M. Mrlik and M. Sedlacik http://orcid.org/0000-0003-3918-5084 * Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, tr. T. Bati 5678, 760 01 Zlín, Czech Republic. E-mail: [email protected]
utb.fulltext.dates Received 20th April 2018 Accepted 21st June 2018 Published on 10th July 2018
utb.fulltext.references 1 J. Stejskal, M. Mrlik, T. Plachy, M. Trchova, J. Kovarova and Y. Li, React. Funct. Polym., 2017, 120, 30–37. 2 M. Mrlik, M. Ilcikova, T. Plachy, R. Moucka, V. Pavlinek and J. Mosnacek, J. Ind. Eng. Chem., 2018, 57, 104–122. 3 Y. D. Liu and H. J. Choi, Electrorheological fluids: smart so matter and characteristics, Soft Matter, 2012, 8, 11961–11978. 4 A. Lengalova, V. Pavlinek, P. Saha, O. Quadrat, T. Kitano and J. Steiskal, Eur. Polym. J., 2003, 39, 641–645. 5 A. Lengalova, V. Pavlinek, P. Saha, O. Quadrat and J. Steiskal, Colloids Surf., A, 2003, 227, 1–8. 6 M. Sedlacik, M. Mrlik, Z. Kozakova, V. Pavlinek and I. Kuritka, Colloid Polym. Sci., 2013, 291, 1105–1111. 7 J. B. Yin, X. X. Wang, R. T. Chang and X. P. Zhao, Soft Matter, 2012, 8, 294–297. 8 M. Stenicka, V. Pavlinek, P. Saha, N. V. Blinova, J. Stejskal and O. Quadrat, Colloid Polym. Sci., 2009, 287, 403–412. 9 T. Plachy, M. Sedlacik, V. Pavlinek and J. Stejskal, J. Mater. Chem. C, 2015, 3, 9973–9980. 10 L. C. Davis, J. Appl. Phys., 1992, 72, 1334–1340. 11 T. Plachy, M. Sedlacik, V. Pavlinek, J. Stejskal, M. P. Graca and L. C. Costa, J. Intell. Mater. Syst. Struct., 2016, 27, 880–886. 12 J. B. Yin, X. A. Xia, L. Q. Xiang and X. P. Zhao, Smart Mater. Struct., 2011, 20, 015002. 13 O. Erol, H. I. Unal and B. Sari, Polym. Compos., 2010, 31, 471–481. 14 K. Oz, M. Yavuz, H. Yilmaz, H. I. Unal and B. Sari, J. Mater. Sci., 2008, 43, 1451–1459. 15 B. Sari, N. Yavas, M. Makulogullari, O. Erol and H. I. Unal, React. Funct. Polym., 2009, 69, 808–815. 16 X. A. Xia, J. B. Yin, P. F. Qiang and X. P. Zhao, Polymer, 2011, 52, 786–792. 17 J. B. Yin, X. P. Zhao, X. Xia, L. Q. Xiang and Y. P. Qiao, Polymer, 2008, 49, 4413–4419. 18 D. Vincenzi, J. Fluid Mech., 2013, 719, 465–487. 19 Z. G. Jia, D. P. Ren, L. X. Xu and R. S. Zhu, Mater. Sci. Semicond. Process., 2012, 15, 270–276. 20 M. Hermanek, R. Zboril, M. Mashlan, L. Machala and O. Schneeweiss, J. Mater. Chem., 2006, 16, 1273–1280. 21 T. Plachy, M. Cvek, Z. Kozakova, M. Sedlacik and R. Moucka, Smart Mater. Struct., 2017, 26, 025026. 22 Z. Kozakova, I. Kuritka, P. Bazant, M. Pastorek and V. Babayan, Mater. Lett., 2015, 138, 116–119. 23 X. Q. Ji, W. L. Zhang, W. P. Jia, X. X. Wang, Y. Tian, L. Deng and J. Q. Liu, J. Ind. Eng. Chem., 2017, 56, 203–211. 24 C. S. Jun, S. H. Kwon, H. J. Choi and Y. Seo, ACS Appl. Mater. Interfaces, 2017, 9, 44811–44819. 25 M. S. Cho, H. J. Choi and M. S. Jhon, Polymer, 2005, 46, 11484–11488. 26 S. G. Kim, J. Y. Lim, J. H. Sung, H. J. Choi and Y. Seo, Polymer, 2007, 48, 6622–6631. 27 K. Zhang, Y. D. Liu, M. S. Jhon and H. J. Choi, J. Colloid Interface Sci., 2013, 409, 259–263. 28 S. H. Piao, C. Y. Gao and H. J. Choi, Polymer, 2017, 127, 174– 181. 29 C. G. Niu, X. F. Dong, H. Zhao and M. Qi, Smart Mater. Struct., 2014, 23, 075018.
utb.fulltext.sponsorship The authors wish to thank the Internal Grant Agency of Tomas Bata University in Zlín (projects nos. IGA/CPS/2017/004 and IGA/CPS/2018/004) for the financial support. This work was supported by the Ministry of Education, Youth and Sports of the Czech Republic – Program NPU I (LO1504). This research was also carried out with support of the Operational Program Research and Development for Innovations co-funded by the European Regional Development Fund (ERDF) and national budget of the Czech Republic, within the framework of the Centre of Polymer Systems project (CZ.1.05/2.1.00/19.0409).
utb.scopus.affiliation Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, tr. T. Bati 5678, Zlín, Czech Republic
utb.fulltext.projects IGA/CPS/2017/004
utb.fulltext.projects IGA/CPS/2018/004
utb.fulltext.projects LO1504
utb.fulltext.projects CZ.1.05/2.1.00/19.0409
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam

Attribution-NonCommercial 3.0 International Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Attribution-NonCommercial 3.0 International