Impact resistance study of high-density polyethylene through drop-weight and tensile impact tests

Mizera, Aleš; Maňas, Miroslav; Maňas, David; Stoklásek, Pavel; Hýlova, Lenka

dc.title	Impact resistance study of high-density polyethylene through drop-weight and tensile impact tests	en
dc.contributor.author	Mizera, Aleš
dc.contributor.author	Maňas, Miroslav
dc.contributor.author	Maňas, David
dc.contributor.author	Stoklásek, Pavel
dc.contributor.author	Hýlova, Lenka
dc.relation.ispartof	Materials Science Forum
dc.identifier.issn	0255-5476 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2018
utb.relation.volume	919
dc.citation.spage	246
dc.citation.epage	253
dc.type	bookPart
dc.language.iso	en
dc.publisher	Trans Tech Publications Ltd.
dc.identifier.doi	10.4028/www.scientific.net/MSF.919.246
dc.relation.uri	https://www.scientific.net/MSF.919.246
dc.subject	Drop weight impact test	en
dc.subject	High-density polyethylene	en
dc.subject	Impact resistance	en
dc.subject	Tensile impact test	en
dc.description.abstract	This study deals with high-density polyethylene (HDPE) which was put to the drop weight and tensile impact tests. HDPE is very widespread thermoplastic polymer, especially in common applications such as packaging, consumer goods and car tanks. The injection moulded HDPE samples were subjected the drop weight impact test at six different potential energies (30, 50, 100, 150, 200 and 230 J) and measured data was evaluated. The second test was performed on pendulum test machine where impact resistance in tensile was studied. It was found out that HDPE is a low-cost material with high-performance properties in the field of the impact resistance which was evaluated in penetration and tensile test where the plastic deformation creates. © 2018 Trans Tech Publications, Switzerland.	en
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1008007
utb.identifier.obdid	43878815
utb.identifier.scopus	2-s2.0-85045424927
utb.identifier.coden	MSFOE
utb.source	c-scopus
dc.date.accessioned	2018-07-27T08:47:39Z
dc.date.available	2018-07-27T08:47:39Z
dc.description.sponsorship	MSMT-7778/2014, MŠMT, Ministerstvo Školství, Mládeže a Tělovýchovy; LO1303, MŠMT, Ministerstvo Školství, Mládeže a Tělovýchovy; CZ.1.05/2.1.00/03.0089, FEDER, European Regional Development Fund
utb.contributor.internalauthor	Mizera, Aleš
utb.contributor.internalauthor	Maňas, Miroslav
utb.contributor.internalauthor	Maňas, David
utb.contributor.internalauthor	Stoklásek, Pavel
utb.contributor.internalauthor	Hýlova, Lenka
utb.fulltext.affiliation	Ales Mizera 1,a* , Miroslav Manas 1,b , David Manas 1,c , Pavel Stoklasek 1,d and Lenka Hylova 1,e 1 Tomas Bata University in Zlin, nam. T. G. Masaryka 5555, 760 01 Zlín, Czech Republic a [email protected], b [email protected], c [email protected], d [email protected], e [email protected] *corresponding author
utb.fulltext.dates	-
utb.fulltext.references	[1] B. Ellis, R. Smith, Polymers: a property database. 2nd ed. Boca Raton, Fla.: CRC Press/Taylor & Francis Group, 12 (2009), ISBN 9781420005707. [2] S.M. Tamboli, S.T. Mhaske, D.D. Kale, Properties of high-density polyethylene filled with waste crosslinked foam, Indian J. Chem. Technol. 11 (2004) 853-864. [3] H.A. Khonakdar, J. Morshedian, M. Mehrabzadeh, U. Wagenknecht, S.H. Jafari, Thermal and shrinkage behaviour of stretched peroxide-crosslinked high-density polyethylene, Eur. Polym. J. 39 (2003) 1729-1734. [4] A.A. Baulin, A.A. Baulin, A.V. Kalandin, N.A. Kudryavtseva, Increasing the cracking resistance of a high-density polyethylene composite, Int. Pol. Sc. Tech. 43 (2015) 21-25. [5] M.N. Khalaf, Mechanical properties of filled high density polyethylene, J. Saudi. Chem. Soc. 19 (2015) 88-91. [6] L.K. Krehula, Z. Hrnjak-Murgić, J. Jelenčić, Study of masterbatch effect on miscibility and morphology in PET/HDPE blends, J. Adhes. Sci. Technol. 29 (2015) 74-93. [7] A.S. Ognedal, A.H. Clausen, A. Dahlen, O.S.Hopperstad, Behavior of PVC and HDPE under highly triaxial stress states: An experimental and numerical study, Mechanics of Materials 72 (2014) 94-108. [8] Q. Yuan, J.S. Shah, K.J. Bertrand, R.D.K. Misra, On Processing and Impact Deformation Behavior of High Density Polyethylene (HDPE)-Calcium Carbonate Nanocomposites, Macromol. Mater. Eng. 294 (2009) 141-151. [9] M.F. Diop, W.R. Burghardt, J.M. Torkelson, Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization, Polymer 55 (2014) 4948-4958. [10] A.H.I. Mourad, M.S. Mozumder, A.Mairpady, H. Pervez, U.M. Kannuri, On the Injection Molding Processing Parameters of HDPE-TiO 2 Nanocmposites, Materials 10 (2017), doi:10.3390/ma10010085. [11] V. Senkerik, M. Stanek, D. Manas, M. Manas, V. Janostik, M. Ovsik, Influence of length of glass fibers in recycled polypropylene on tensile properties, MATEC Web of Conferences 76 (2016) 1-4. [12] A. Mizera, P. Chalupa, I. Hudec, Impact resistance of high-density polyethylene against falling penetrator with different potential energy, MATEC Web of Conferences 125 (2017) 1-4.
utb.fulltext.sponsorship	This paper is supported by the internal grant of TBU in Zlin No. IGA/FT/2018/012 and funded from the resources of specific university research and by the Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme project No. LO1303 (MSMT-7778/2014) and also by the European Regional Development Fund under the project CEBIA-Tech No. CZ.1.05/2.1.00/03.0089.
utb.fulltext.projects	IGA/FT/2018/012
utb.fulltext.projects	LO1303 (MSMT-7778/2014)
utb.fulltext.projects	CZ.1.05/2.1.00/03.0089