Publikace UTB
Repozitář publikační činnosti UTB

Electrically-controlled permeation of vapors through carbon nanotube network-based membranes

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Electrically-controlled permeation of vapors through carbon nanotube network-based membranes en
dc.contributor.author Slobodian, Petr
dc.contributor.author Říha, Pavel
dc.contributor.author Olejník, Robert
dc.relation.ispartof IEEE Transactions on Nanotechnology
dc.identifier.issn 1536-125X Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2018
utb.relation.volume 17
utb.relation.issue 2
dc.citation.spage 332
dc.citation.epage 337
dc.type article
dc.language.iso en
dc.publisher Institute of Electrical and Electronics Engineers Inc.
dc.identifier.doi 10.1109/TNANO.2018.2802042
dc.relation.uri https://ieeexplore.ieee.org/document/8281003/
dc.subject Carbon nanotubes en
dc.subject electrically controlled membranes en
dc.subject permeation of chemical vapors en
dc.description.abstract DC voltage was used to control and increase the permeation rate of typical carbohydrate and alcohol vapors through a conductive membrane composed either of a layer of entangled multiwalled carbon nanotubes or of a nanotube layer strengthened by a porous polyurethane nonwoven mat. The permeation rate rise was partly due to the Joule effect increasing the membrane temperature and the vapor pressure in the vicinity of the inlet side of the membrane. However, the effects of vapor polarity and the interaction of vapor and charged nanotubes were also involved. When the nanotube membrane was uncharged, the permeation rate was higher for nonpolar hydrocarbon and nonpolar tetrachlormethane vapors than for polar methanol vapors. The opposite effect was observed for an electrically charged membrane. Whereas the increasing voltage and, consequently, the membrane temperature increased the relative permeation rates of both vapor types, the relative permeation rate of alcohol vapors was up to twofold higher than the corresponding rates for carbohydrate vapors at the similar membrane temperature. © 2002-2012 IEEE. en
utb.faculty University Institute
dc.identifier.uri http://hdl.handle.net/10563/1007799
utb.identifier.obdid 43878278
utb.identifier.scopus 2-s2.0-85041680432
utb.identifier.wok 000427251000018
utb.source j-scopus
dc.date.accessioned 2018-04-23T15:01:45Z
dc.date.available 2018-04-23T15:01:45Z
dc.description.sponsorship Ministry of Education, Youth and Sports of the Czech Republic-Program NPU I [LO1504]; Operational Program Research and Development for Innovations; European Regional Development Fund (ERDF); national budget of the Czech Republic [CZ.1.05/2.1.00/19.0409]; Tomas Bata University in Zlin [IGA/CPS/2017/002]; Fund of the Czech Academy of Sciences, Institute of Hydrodynamics [AV0Z20600510]
utb.ou Centre of Polymer Systems
utb.contributor.internalauthor Slobodian, Petr
utb.contributor.internalauthor Olejník, Robert
utb.fulltext.affiliation Petr Slobodian , Pavel Riha, and Robert Olejnik Corresponding author: Petr Slobodian. P. Slobodian and R. Olejnik are with the Centre of Polymer Systems, Tomas Bata University, Zlin 76001, Czech Republic (e-mail: [email protected]; [email protected]). P. Riha is with the Institute of Hydrodynamics, Czech Academy of Sciences, Prague 166 12, Czech Republic (e-mail: [email protected]).
utb.fulltext.dates Manuscript received December 14, 2017; accepted January 27, 2018. Date of publication February 5, 2018; date of current version March 8, 2018.
utb.fulltext.references [1] W. Obitayo and T. Liu, “A review: Carbon nanotube-based piezoresistivity strain sensors,” J. Sensors, vol. 2012, 2012, Art. no. 652438. [2] D. R. Kauffman and A. Star, “Carbon nanotube gas and vapour sensors,” Angew. Chem. Int., vol. 47, pp. 6550–6570, 2008. [3] B. Van der Bruggen, “The separation power of nanotubes in membranes: A review,” ISRN Nanotechnol., vol. 2012, 2012, Art. no. 693485. [4] S. Wang, D. Haldane, R. Liang, J. Smithyman, C. Zhang, and B. Wang, “Nanoscale infiltration behaviour and through-thickness permeability of carbon nanotubes buckypaper,” Nanotechnology, vol. 24, 2013, Art. no. 015704. [5] H. Lu, D. Zhao, Y. Tang, J. Gou, J. Leng, and S. Du, “Shape memory polymer carbon nanocomposites: Based on carbon nanopaper,” presented at the Conf. Earth Space, Honolulu, HI, USA, Mar. 14–17, 2010, pp. 3665–3678. [6] L. Haibao, L. Yanju, G. Jihua, L. Jinsong, and D. Shanyi, “Surface coating of multi-walled carbon nanotube nanopaper on shape-memory polymer for multifunctionalization,” Comput. Sci. Technol., vol. 71, pp. 1427–1434, 2011. [7] J. W. Cho, J. W. Kim, Y. C. Jung, and N. S. Goo, “Electroactive shape-memory polyurethane composites incorporating carbon nanotubes,” Macromol. Rapid Commun., vol. 26, pp. 412–416, 2005. [8] L. Haibao, M. H. Wei, L. Fei, and Y. Kai, “Nanoscale design of nano-sized particles in shape-memory polymer nanocomposites driven by electricity,” Materials, vol. 6, pp. 3742–3754, 2013. [9] P. J. Cottinet et al., “Nonlinear strain–electric field relationship of carbon nanotube buckypaper/nafion actuators,” Sens. Actuators A, Phys., vol. 170, pp. 164–171, 2011. [10] I. W. P. Chen, Z. Liang, B. Wang, and C. Zhang, “Charge-induced asymmetrical displacement of an aligned carbon nanotube buckypaper actuator,” Carbon, vol. 48, pp. 1064–1069, 2010. [11] P. J. Cottinet, C. Souders, S. Y. Tsai, R. Liang, B. Wang, and C. Zhang, “Electromechanical actuation of buckypaper actuator: Material properties and performance relationships,” Phys. Lett. A, vol. 376, pp. 1132–1136, 2012. [12] Winarto, D. Takaiwa, E. Yamamoto, and K. Yasuoka, “Separation of waterethanol solutions with carbon nanotubes and electric fields,” Phys. Chem. Chem. Phys., vol. 18, pp. 33310–33319, 2016. [13] J. Dzubiella, R. J. Allen, and J. P. Hansen, “Electric field-controlled water permeation coupled to ion transport through a nanopore,” J. Chem. Phys., vol. 120, pp. 5001–5002, 2004. [14] S. O. Diallo, E. Mamontov, W. Nobuo, S. Inagaki, and Y. Fukushima, “Enhanced translational diffusion of confined water under electric field,” Phys. Rev. E, vol. 86, 2012, Art. no. 021506. [15] Y. C. He, G. Sun, K. Koga, and L. M. Xu, “Electrostatic field-exposed water in nanotube at constant axial pressure,” Sci. Rep., vol. 4, 2014, Art. no. 6596. [16] P. Slobodian, P. Riha, A. Lengalova, P. Svoboda, and P. Saha, “Multi-wall carbon nanotube networks as potential resistive gas sensors for organic vapor detection,” Carbon, vol. 49, pp. 2499–2507, 2011. [17] R. Benlikaya, P. Slobodian, P. Riha, and R. Olejnik, “The enhanced alcohol sensing response of multiwalled carbon nanotube networks induced by alkyl diamine treatment,” Sens. Actuators B, Chem., vol. 201, pp. 122–130, 2014. [18] P. Slobodian, P. Riha, A. Lengalova, and P. Saha, “Compressive stresselectrical conductivity characteristics of multiwall carbon nanotube networks,” J. Mater. Sci., vol. 46, pp. 3186–3190, 2011. [19] P. Slobodian, P. Riha, and P. Saha, “A highly-deformable composite composed of an entangled network of electrically-conductive carbonnanotubes embedded in elastic polyurethane,” Carbon, vol. 50, pp. 3446–3453, 2012. [20] P. Slobodian, P. Riha, R. Olejnik, U. Cvelbar, and P. Saha, “Enhancing effect of KMnO4 oxidation of carbon nanotubes network embedded in elastic polyurethane on overall electro-mechanical properties of composite,” Comp. Sci. Technol., vol. 81, pp. 54–60, 2013. [21] J. K. Holt et al., “Fast mass transport through sub-2-nanometer carbon nanotubes,” Science, vol. 312, pp. 1034–1037, 2006. [22] B. Pan and B. Xing, “Adsorption mechanisms of organic chemicals on carbon nanotubes,” Environ. Sci. Technol., vol. 42, pp. 9005–9013, 2008.
utb.fulltext.sponsorship This work was supported in part by the Ministry of Education, Youth and Sports of the Czech Republic - Program NPU I (LO1504), in part by the Operational Program Research and Development for Innovations cofunded by the European Regional Development Fund (ERDF) and the national budget of the Czech Republic, within the framework of the project CPS-strengthening research capacity (reg. number: CZ.1.05/2.1.00/19.0409), and in part by the internal grant of the Tomas Bata University in Zlin (IGA/CPS/2017/002) funded from the resources of the Specific University Research. The work of P. Riha was supported by the Fund of the Czech Academy of Sciences, Institute of Hydrodynamics (AV0Z20600510). The review of this paper was arranged by Associate Editor Y. Hu.
utb.scopus.affiliation Centre of Polymer Systems, Tomas Bata University, Zlin, Czech Republic; Institute of Hydrodynamics, Czech Academy of Sciences, Prague, Czech Republic
utb.fulltext.projects LO1504
utb.fulltext.projects CZ.1.05/2.1.00/19.0409
utb.fulltext.projects IGA/CPS/2017/002
utb.fulltext.projects AV0Z20600510
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam