Changes of PVC nanocomposite properties connected with clay content

Kalendová, Alena; Brázdilová, Lenka; Měřínská, Dagmar; Mrkvičková, Simona

dc.title	Changes of PVC nanocomposite properties connected with clay content	en
dc.contributor.author	Kalendová, Alena
dc.contributor.author	Brázdilová, Lenka
dc.contributor.author	Měřínská, Dagmar
dc.contributor.author	Mrkvičková, Simona
dc.relation.ispartof	Annals of DAAAM and Proceedings of the International DAAAM Symposium
dc.identifier.issn	1726-9679 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.isbn	978-3-902734-11-2
dc.date.issued	2017
dc.citation.spage	921
dc.citation.epage	925
dc.event.title	28th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2017
dc.event.location	Zadar
utb.event.state-en	Croatia
utb.event.state-cs	Chorvatsko
dc.event.sdate	2017-11-08
dc.event.edate	2017-11-11
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Danube Adria Association for Automation and Manufacturing, DAAAM
dc.identifier.doi	10.2507/28th.daaam.proceedings.127
dc.relation.uri	http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2017/127.pdf
dc.subject	Clay	en
dc.subject	Conductivity	en
dc.subject	Nanocomposite	en
dc.subject	PVC	en
dc.description.abstract	The polyvinylchloride (PVC) is an extensively used thermoplastic material, therefore the research were focused on this polymer. The aim of this work was to determinate the current development of nanocomposite materials based the polyvinylchloride and the influence of filler loading on their thermal and electrical properties. As nanofillers were used clays derived from montmorillonite (MMT): MMTNa+ and MMT30B. MMTNa+ presented sodium type of montmorillonite and MMT30 is organically modified type of MMT. Both of the clays were intercalated or cointercalated with plasticizer bis(2-ethylhexyl) phthalate (DEHP). As the compounder the Buss KO-kneader was selected. This type of compounder is suitable for processing temperature-sensitive polymers. The properties as thermal and electrical conductivity were evaluated in comparison to the structure.	en
utb.faculty	Faculty of Technology
dc.identifier.uri	http://hdl.handle.net/10563/1007747
utb.identifier.obdid	43877675
utb.identifier.scopus	2-s2.0-85040734296
utb.source	d-scopus
dc.date.accessioned	2018-02-26T10:20:05Z
dc.date.available	2018-02-26T10:20:05Z
dc.rights	Attribution-NonCommercial 4.0 International
dc.rights.uri	https://creativecommons.org/licenses/by-nc/4.0/
dc.rights.access	openAccess
utb.contributor.internalauthor	Kalendová, Alena
utb.contributor.internalauthor	Brázdilová, Lenka
utb.contributor.internalauthor	Měřínská, Dagmar
utb.contributor.internalauthor	Mrkvičková, Simona
utb.fulltext.affiliation	Alena Kalendova* 1 , Lenka Brazdilova (Sabadasova) 1 , Dagmar Merinska 1 , Simona Mrkvickova 1 1 Tomas Bata University in Zlin, Faculty of Technology, Vavreckova 275, 760 01 Zlin, Czech Republic, email:[email protected]
utb.fulltext.dates	-
utb.fulltext.references	[1] Han Wang; Guiyuan Xie; Minghe Fang; Zhe Ying; Yu Tong; You Zeng, (2015). Electrical and mechanical properties of antistatic PVC films containing multi-layer graphene. Composites Part B. 79. 444-450. [2] Saad ALG; Sayed WM; Ahmed MGM; Hassan AM. (1999). Preparation and properties of some filled poly(vinyl chloride) compositions. J Appl Polym Sci. 73(13). 2657-70. [3] Moulay S. (2010). Chemical modification of poly(vinyl chloride)- still on the run. ProgPolym Sci. 35(3). 303-31. [4] Giannelis E.P. (1996). Polymer layered silicate nanocomposites. Adv. Mater. 8. 29–35. [5] Alexandre M.; Dubois P. (2000). Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng. R. Rep. 28. 1–63. [6] Fornes T.D.; Yoon P.J.; Hunter D.L.; Keskkula H.; Paul D.R. (2002). Effect of organoclay structure on nylon 6 nanocomposite morphology and properties. Polymer. 43. 5915–5933. [7] Stretz H.A.; Paul D.R.; Li R.; Keskkula H.; Cassidy P.E. (2005). Intercalation and exfoliation relationships in melt-processed poly(styrene-co-acrylonitrile)/montmorillonite nanocomposites. Polymer. 46. 2621–2637. [8] Peprnicek T.; Kalendova A.; Pavlova E.; Simonik J.; Duchet J.; Gerard J.F. (2006). Poly(vinyl chloride)-paste/clay nanocomposites: investigation of thermal and morphological characteristics. Polym. Degrad. Stab. 91. 3322–3329. [9] Shah R.K.; Kim D.H.; Paul D.R. (2007). Morphology and properties of nanocomposites formed from ethylene/methacrylic acid copolymers and organoclays. Polymer. 48. 1047–1057. [10] Merinska D.; Kubisova H.; Kalendova A.; Svoboda P.; Hromadkova J. (2012). Processing and properties of polyethylene/montmorillonite nanocomposites. Journal of Thermplastic Composite Materials. 25(1). 115-131. [11] McAtee J.J. (1956). Heterogeneity in montmorillonite. Clay Minerals. 5. 279–288. [12] Paul D.R.; Robeson L.M. (2008). Polymer nanotechnology: nanocomposites. Polymer. 49. 3187–3204. [13] Petersen H.; Jakubowicz I.; Enebro J.; Yarahmadi J. (2015) Organic modification of montmorillonite for application in plasticized PVC nanocomposites. Applied Clay Science. 107. 78–84 [14] Blaha A.; Pavlica. R. Thermal conductivity measurement by non-stationary method. Mereni tepelne vodivosti nestacionarni metodou. (2001). CHISA.15. - 18. října 2001. Srni. Sumava. Czech Republic. Czech Society of Chemical Engineering . ISBN 80-86059-32-4.
utb.fulltext.sponsorship	This project was supported by internal grant of TBU in Zlin RVOE. Next I wish to thanks Mr. Antonin Blaha for the help with the thermal conductivity measurement.
utb.scopus.affiliation	Faculty of Technology, Tomas Bata University in Zlin, Vavreckova 275, Zlin, Czech Republic