Kontaktujte nás | Jazyk: čeština English
dc.title | Influence of initial fiber length on the mechanical and tribological properties of hemp fiber reinforced plants-derived polyamide 1010 biomass composites | en |
dc.contributor.author | Nishitani, Yosuke | |
dc.contributor.author | Mukaida, Jun | |
dc.contributor.author | Yamanaka, Toshiyuki | |
dc.contributor.author | Kajiyama, Tetsuto | |
dc.contributor.author | Kitano, Takeshi | |
dc.relation.ispartof | AIP Conference Proceedings | |
dc.identifier.issn | 0094-243X Scopus Sources, Sherpa/RoMEO, JCR | |
dc.identifier.isbn | 978-0-7354-1606-2 | |
dc.date.issued | 2017 | |
utb.relation.volume | 1914 | |
dc.event.title | 32nd International Conference of the Polymer Processing Society, PPS 2016 | |
dc.event.location | Lyon | |
utb.event.state-en | France | |
utb.event.state-cs | Francie | |
dc.event.sdate | 2016-07-25 | |
dc.event.edate | 2016-07-29 | |
dc.type | conferenceObject | |
dc.language.iso | en | |
dc.publisher | American Institute of Physics Inc. | |
dc.identifier.doi | 10.1063/1.5016730 | |
dc.relation.uri | http://aip.scitation.org/doi/abs/10.1063/1.5016730 | |
dc.description.abstract | The aim of this study is to investigate the influence of initial fiber length on the mechanical and tribological properties of hemp fiber filled plants-derived polyamide 1010 biomass composites in order to develop the new engineering materials such as structural materials and tribomaterials based on all plants-derived materials. Plants-derived polyamide 1010 (PA1010) was made from plants-derived castor oil. Hemp fiber (HF) was previously cut into length of 5mm, 10mm, 20mm and 50mm, and was surface-treated by two types of treatment: alkali treatment by NaOH solution and surface treatment by ureidosilane coupling agent (HF-S). The volume fraction of HF-S in the composites was fixed with 20vol.%. HF-S/PA1010 biomass composites were extruded by a twin screw extruder and injection-molded. Their mechanical properties such as tensile, bending, and Izod impact test, and tribological properties by ring-on-plate type sliding wear testing were evaluated. It was found that the mechanical properties of HF-S/PA1010 biomass composites change with the initial fiber length of HF. The critical fiber lengths of various mechanical properties of these biomass composites decrease as follows: strength > modulus > elongation at break > Izod impact strength. Tribological properties such as frictional coefficient and specific wear rate also change with the initial fiber length. The frictional coefficient of these biomass composites slightly decrease with increasing the fiber length. On the other hand, the specific wear rate of these biomass composites dramatically improved with increasing the fiber length, and has a minimum peak at 20mm. It follows from these results that it may be possible to develop the new higher performance engineering materials by selecting the suitable fiber length. © 2017 Author(s). | en |
utb.faculty | Faculty of Technology | |
dc.identifier.uri | http://hdl.handle.net/10563/1007717 | |
utb.identifier.obdid | 43877843 | |
utb.identifier.scopus | 2-s2.0-85038971292 | |
utb.identifier.wok | 000426217800044 | |
utb.source | d-scopus | |
dc.date.accessioned | 2018-02-26T10:20:01Z | |
dc.date.available | 2018-02-26T10:20:01Z | |
dc.description.sponsorship | 1.05/2.1.00/ 03.0111; CZ.; MEXT, Ministry of Education, Culture, Sports, Science and Technology; 25420735, JSPS, Japan Society for the Promotion of Science; 16K06750, JSPS, Japan Society for the Promotion of Science; FMS, Faculty of Medical Sciences, Newcastle University | |
dc.description.sponsorship | JSPS KAKENHI [16K06750, 25420735]; Functional Microstructured Surfaces Reserch Center (FMS, MEXT, Japan) of Kogakuin University; Project Rresearch of Research Institute for Science and Technology of Kogakuin University; national budget of Czech Republic [CZ. 1.05/2.1.00/03.0111] | |
utb.contributor.internalauthor | Kitano, Takeshi | |
utb.fulltext.affiliation | 1. A. C. Wibowo, A. K. Mohanty, M. Misra and L. T. Drzai, Ind. Eng. Chem. Res. 43, 4883–4888 (2004). 2. L. Petersson and K. Oksman, Compos. Sci. Technol. 66, 2187–2196 (2006). 3. N. Chand and M. Fashim, Tribology of natural fiber polymer composites (Woodhead Publishing Ltd., Cambridge, 2008), pp. 1–58. 4. L. Yu., K. Dean and L. Li, Prog. Polym. Sci., 31, 576–602 (2006). 5. X. Li, L. G. Tabil and S. Panigrashi, J. Polym. Environ., 15, 25–33 (2007). 6. Y. Xie, C. A. S. Hill, Z. Xiao, H. Militz and C. Mai, Composites: Part A, 41, 806–819 (2010). 7. O. Faruk, A. K. Bledzki, H.-P. Fink and M. Sain, Prog. Polym. Sci., 37, 1552–1596 (2012). 8. S. Kuciel, P. Kuzniar and A. Liber-knec, Polimery, 57, 627–634 (2012). 9. Y. Nishitani, M. Hasumi and T. Kitano, AIP Conference Proceedings, 1664, 060007 (2015). 10. J. Mukaida, Y. Nishitani, and T. Kitano, AIP Conference Proceedings, 1664, 060008 (2015). 11. Y. Nishitani, J. Mukaida, T. Kajiyama, Y. Yamanka, T. Yamanaka and T. Kitano, AIP Conference Proceedings, 1713, 120007 (2016). 12. Y. Nishitani, J. Mukaida, T. Kajiyama, Y. Yamanka, T. Yamanaka and T. Kitano, AIP Conference Proceedings, 1779, 060004 (2016). 13. Y. Nishitani, T. Yamanaka, T. Kajiyama and T. Kitano, “Thermal Properties of Hemp Fiber Reinforced Plants-Derived Polyamide Biomass Composites and Their Dynamic Viscoelastic Properties in Molten State” in Viscoelastic and Viscoplastic Materials edited by M. F. El-Amin (Intech, Rijeka, 2016), pp. 53–79. 14. H. Mutlu and M. A. R. Meier, European J. Liquid Sci. Technol., 112, 10-30 (2010). 15. T. Shimizu, JETI, 59, 71–83 (2011) (in Japanese). 16. A. Thumm and A. R. Dickson, Composites: Part A, 46, 45-52 (2013). 17. J. L. Thomason, Composites: Part A, 33, 1641–1652 (2002). 18. S. Bahadur, Wear, 245, 92–99 (2000). 19. S. Yu, Z. Yu and Y.-W. Mai, Tribology International, 40, 855–862 (2007). 20. Y. Nishitani, Y. Yamada, C. Ishii, I. Sekiguchi and T. Kitano, Polym. Eng. Sci., 50, 100–112 (2010). | |
utb.fulltext.dates | - | |
utb.fulltext.references | Yosuke Nishitani 1,a) , Jun Mukaida 2 , Toshiyuki Yamanaka 3 , Tetsuto Kajiyama 4 and Takeshi Kitano 5 1 Department of Mechanical Engineering, Faculty of Engineering, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo 1920015, Japan 2 Department of Mechanical Engineering, Graduate School of Engineering, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo 1920015, Japan 3 Tokyo Metropolitan Industrial Technology Research Institute, 2-4-10, Aomi, koto, Tokyo 135-0064, Japan 4 Jonan Branch, Tokyo Metropolitan Industrial Technology Research Institute, 1-20-20, Minamikamata, Ota, Tokyo 144-0035, Japan 5 Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, T. G. M. 275, Zlin, 762 72 Czech Republic a) Corresponding author: [email protected] | |
utb.fulltext.sponsorship | This work was supported by JSPS KAKENHI Grant Number 16K06750 and 25420735. We would like to thank the Functional Microstructured Surfaces Reserch Center (FMS, MEXT, Japan) of Kogakuin University, and the Project Rresearch of Research Institute for Science and Technology of Kogakuin University for funding this study, and partial support by national budget of Czech Republic within the framework of the Centre of Polymer Systems project (reg. number: CZ. 1.05/2.1.00/ 03.0111). | |
utb.scopus.affiliation | Department of Mechanical Engineering, Faculty of Engineering, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo, Japan; Department of Mechanical Engineering, Graduate School of Engineering, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo, Japan; Tokyo Metropolitan Industrial Technology Research Institute, 2-4-10, Aomi, koto, Tokyo, Japan; Jonan Branch, Tokyo Metropolitan Industrial Technology Research Institute, 1-20-20, Minamikamata, Ota, Tokyo, Japan; Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, T. G. M. 275, Zlin, Czech Republic | |
utb.fulltext.projects | JSPS KAKENHI 16K06750 | |
utb.fulltext.projects | JSPS KAKENHI 25420735 | |
utb.fulltext.projects | CZ. 1.05/2.1.00/ 03.0111 |