Alternative ballistic improvement of the car interior

Gracla, Michal; Maláník, Zdeněk

dc.title	Alternative ballistic improvement of the car interior	en
dc.contributor.author	Gracla, Michal
dc.contributor.author	Maláník, Zdeněk
dc.relation.ispartof	ICMT 2017 - 6th International Conference on Military Technologies
dc.identifier.isbn	978-1-5386-1988-9
dc.date.issued	2017
dc.citation.spage	149
dc.citation.epage	159
dc.event.title	6th International Conference on Military Technologies, ICMT 2017
dc.event.sdate	2017-05-31
dc.event.edate	2017-06-02
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Institute of Electrical and Electronics Engineers Inc.
dc.identifier.doi	10.1109/MILTECHS.2017.7988747
dc.relation.uri	http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7988747
dc.subject	automobile	en
dc.subject	ballistically resistant material	en
dc.subject	bodyguard	en
dc.subject	bullet	en
dc.subject	charge	en
dc.subject	firearm	en
dc.subject	installation	en
dc.subject	private courier	en
dc.description.abstract	Ballistically resistant vehicles are currently frequently used. The progress is moving on and new ballistically resistant vehicles are connected with it. However, such vehicles are a very expensive matter. Only very rich people can afford them. They are financed by the state for the use of government and army. This alternative is available to everyone else such as lifeguards and couriers. The alternative ballistic improvement puts an emphasis on the simplicity of performance and especially on the financial costs connected with this improvement. This part of the article is going to deal only with the ballistic improvement of the vehicle and it will be followed by other complements dealing with remaining parts of the ballistic improvement of the vehicle. © 2017 IEEE.	en
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1007520
utb.identifier.obdid	43876908
utb.identifier.scopus	2-s2.0-85029359092
utb.source	d-scopus
dc.date.accessioned	2017-10-16T14:43:42Z
dc.date.available	2017-10-16T14:43:42Z
utb.contributor.internalauthor	Gracla, Michal
utb.contributor.internalauthor	Maláník, Zdeněk
utb.fulltext.affiliation	Michal Gracla * , Zdeněk Maláník † * Tomas Bata University in Zlin, Faculty of Applied Informatics, Namesti T.G.Masaryka 5555, 760 01 Zlin, Czech Republic, e-mail: [email protected] † Tomas Bata University in Zlin, Faculty of Applied Informatics, Namesti T.G.Masaryka 5555, 760 01 Zlin, Czech Republic, e-mail: [email protected]
utb.fulltext.dates	-
utb.fulltext.references	[1] Liability insurance for injury caused by vehicles and amending certain related laws (vehicle insurance), vol. 1999, no. 168. Czech Republic: The Czech Republic, 1999. O pojištění odpovědnosti za újmu způsobenou provozem vozidla a o změně některých souvisejících zákonů (zákon o pojištění odpovědnosti z provozu vozidla), vol. 1999, no. 168. Česká republika: Česká republika, 1999. [2] Ludeco, “Types of bodywork personal automobiles," Blog.cz, 2012. [Online]. Available: http://ludeco.blog.cz/0803/typy-karoserii-osobnich-automobilu. Accessed: Jan. 31, 2017. Ludeco, "Typy karoserií osobních automobilů," Blog.cz, 2012. [Online]. Available: http://ludeco.blog.cz/0803/typy-karoserii-osobnich-automobilu. Accessed: Jan. 31, 2017. [3] Administrator, " Types of bodywork personal automobiles," 2017. [Online]. Available: http://www.autoznalosti.cz/index.php/karoserie/32-druhy-karoserii-osobnich-automobilu.html. Accessed: Jan. 31, 2017. Administrator, "Druhy karoserií osobních automobilů," 2017. [Online]. Available: http://www.autoznalosti.cz/index.php/karoserie/32-druhy-karoserii-osobnich-automobilu.html. Accessed: Jan. 31, 2017. [4] L. Vaněk, " Analysis of the evolution of categories of passenger cars," 2006. L. Vaněk, "Analýza vývoje kategorií osobních automobilů," 2006. [5] "From Sedan after SUV: Guide nomenclature with bodywork of automobile, part 1", Autoweb: auta až na prvním místě, ©2000-2017. [Online]. Available: http://www.autoweb.cz/od-sedanu-po-suv-pruvodce-karosarskym-nazvoslovim-dil-1/. Accessed: Jan. 31, 2017. “Od sedanu po SUV: Průvodce karosářským názvoslovím, díl 1.”, Autoweb: auta až na prvním místě, ©2000-2017. [Online]. Available: http://www.autoweb.cz/od-sedanu-po-suv-pruvodce-karosarskym-nazvoslovim-dil-1/. Accessed: Jan. 31, 2017. [6] MF DNES, " Cars and their classes. Who is who? - iDNES.cz," iDNES.cz, 2004. [Online]. Available: http://auto.idnes.cz/auta-a-jejich-tridy-kdo-je-kdo-din-/automoto.aspx?c=A041025_172955_automoto_fdv. Accessed: Jan. 31, 2017. MF DNES, "Auta a jejich třídy. Kdo je kdo? - iDNES.cz," iDNES.cz, 2004. [Online]. Available: http://auto.idnes.cz/auta-a-jejich-tridy-kdo-je-kdo-din-/automoto.aspx?c=A041025_172955_automoto_fdv. Accessed: Jan. 31, 2017. [7] MEDIA MARKETING SERVICES, " From Smart after Range Rover: the Wizard with bodywork nomenclature, part 2," 2000. [Online]. Available: http://www.autoweb.cz/od-smartu-po-range-rover-pruvodce-karosarskym-nazvoslovim-dil-2/. Accessed: Jan. 31, 2017. MEDIA MARKETING SERVICES, "Od Smartu po range Rover: Průvodce karosářským názvoslovím, díl 2," 2000. [Online]. Available: http://www.autoweb.cz/od-smartu-po-range-rover-pruvodce-karosarskym-nazvoslovim-dil-2/. Accessed: Jan. 31, 2017. [8] R. Jankových, Barrel weapons and ammunition, 1. ed. 2012. R. Jankových, Hlavňové zbraně a střelivo, 1. ed. 2012. [9] L. Juříček and P. Novotný, Modeling bulletproof steel plates small caliber armor-piercing projectile. Military medical leaves, 2015. L. Juříček and P. Novotný, Modelování průstřelu ocelové desky malorážkovou průbojnou střelou. Vojenské zdravotnické listy, 2015. [10] R. Lohmann, “Teijin Aramid @: Techtextile Middle East Symposium”, in Intersecexpo, 2014. [11] Czechproduct, "Abrasion resistant, high strength for armor plates,," 2017. [Online]. Available: http://www.gamaocel.cz/. Accessed: Jan. 31, 2017. Czechproduct, "Otěruvzdorné, vysokopevnostní a pancéřové plechy," 2017. [Online]. Available: http://www.gamaocel.cz/. Accessed: Jan. 31, 2017. [12] "SSAB high-strength steel - sheet, plate, coil, tube, profile," SSAB, 2017. [Online]. Available: http://www.ssab.com/. Accessed: Jan. 31, 2017. [13] “SSAB”. [Online]. Available: https://www.ssab.com/products/brands/hardox. Accessed: Jan. 31, 2017. [14] SDA - statistics, 2001. [Online]. Available: http://portal.sda-cia.cz/. Accessed: Jan. 31, 2017. SDA - statistiky, 2001. [Online]. Available: http://portal.sda-cia.cz/. Accessed: Jan. 31, 2017. [15] Z. Maláník, "Ballistic protection worker PKB," Alarm Focus, vol. 1, 2014. Z. Maláník, "Balistická ochrana pracovníka PKB," Alarm Focus, vol. 1, 2014. [16] (1995,). ČSN 39 5360. Tests of resistance of protective means: tests of resistance against bullets, shrapnel and stabbing weapons - Technical requirements and tests. (1995,). ČSN 39 5360. Zkoušky odolnosti ochranných prostředků: Zkoušky odolnosti proti střelám, střepinám a bodným zbraním - Technické požadavky a zkoušky. [17] (2000,). NIJ Standard - 0101.04. Ballistic Resistance of Personal Body Armor. Washing-ton, DC 20531: U.S. Department of Justice. [18] “NIJ Standard 0101.04 2000”, Ballistic Edge: Research Laboratory Mechanical Impact Testing. [Online]. Available: http://www.ballisticedge.com.au/NIJ0104.htm. Accessed: Jan. 31, 2017. [19] Z. Pokorný et al., Security Technologies, Systems and Management II .: The Theory and Practice of asset protection and physical security, 1. ed. Zlín, 2012. Z. Pokorný et al., Bezpečnostní technologie, systémy a management II.: Teorie a praxe ochran majetku a fyzické bezpečnosti, 1. ed. Zlín, 2012. [20] M. Ptáček, " Ballistic protection commercial security industry workers," 2007. M. Ptáček, "Balistická ochrana pracovníka Průmyslu komerční bezpečnosti," 2007. [21] “SVOS: Armoured vehicles”, ©2014. [Online]. Available: http://www.armsvos.cz/en/. Accessed: Jan. 31, 2017.
utb.fulltext.sponsorship	This work was supported by the Internal Grant Agency of Tomas Bata University in Zlin under the project No. IGA/FAI/2017/010.
utb.scopus.affiliation	Tomas Bata University in Zlin, Faculty of Applied Informatics, Namesti T.G. Masaryka 5555, Zlin, Czech Republic