Mechanical properties of modified HDPE by ionizing radiation after temperature load under and above the pure HDPE melting temperature

Stoklásek, Pavel; Mizera, Aleš; Maňas, Miroslav; Maňas, David; Bednařík, Martin; Janoštík, Václav

dc.title	Mechanical properties of modified HDPE by ionizing radiation after temperature load under and above the pure HDPE melting temperature	en
dc.contributor.author	Stoklásek, Pavel
dc.contributor.author	Mizera, Aleš
dc.contributor.author	Maňas, Miroslav
dc.contributor.author	Maňas, David
dc.contributor.author	Bednařík, Martin
dc.contributor.author	Janoštík, Václav
dc.relation.ispartof	Proceedings of the 2016 International Conference on Innovative Material Science and Technology (IMST 2016)
dc.identifier.issn	1951-6851 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.isbn	978-94-6252-269-5
dc.date.issued	2016
utb.relation.volume	139
dc.citation.spage	416
dc.citation.epage	420
dc.event.title	International Conference on Innovative Material Science and Technology (IMST)
dc.event.location	Shenzhen
utb.event.state-en	China
utb.event.state-cs	Čína
dc.event.sdate	2016-08-19
dc.event.edate	2016-08-21
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Atlantis Press
dc.relation.uri	http://www.atlantis-press.com/php/pub.php?publication=imst-16&frame=http%3A//www.atlantis-press.com/php/paper-details.php%3Ffrom%3Dauthor+index%26id%3D25866223%26querystr%3Dauthorstr%253DH
dc.subject	tensile strength	en
dc.subject	hardness	en
dc.subject	radiation cross-linking	en
dc.subject	high density polyethylene	en
dc.subject	temperature load	en
dc.description.abstract	Radiation processing of polymers is a well-established and economical commercial method of precisely modifying the properties of polymers, especially mechanical properties. The mechanical properties of modified HDPE samples by beta rays were measured at the ambient temperature and after temperature load under and above the pure HDPE melting temperature. The tested samples showed significant changes of mechanical behaviour before and after temperature load. From this point of view, new applications could also be seen in areas with service temperatures higher than their former melting point.	en
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1007030
utb.identifier.obdid	43876090
utb.identifier.wok	000391726800062
utb.source	d-wok
dc.date.accessioned	2017-07-25T08:54:47Z
dc.date.available	2017-07-25T08:54:47Z
dc.rights	Attribution-NonCommercial 4.0 International
dc.rights.uri	https://creativecommons.org/licenses/by-nc/4.0/
dc.rights.access	openAccess
utb.contributor.internalauthor	Stoklásek, Pavel
utb.contributor.internalauthor	Mizera, Aleš
utb.contributor.internalauthor	Maňas, Miroslav
utb.contributor.internalauthor	Maňas, David
utb.contributor.internalauthor	Bednařík, Martin
utb.contributor.internalauthor	Janoštík, Václav
utb.fulltext.affiliation	Pavel Stoklasek, Ales Mizera , Miroslav Manas, David Manas, Martin Bednarik and Vaclav Janostik Tomas Bata University in Zlin, nam. T.G. Masaryka 5555, 76001 Zlin, Czech Republic a Corresponding author: [email protected]
utb.fulltext.dates	-
utb.fulltext.sponsorship	This paper is supported by the internal grant of TBU in Zlin No. IGA/FT/2016/010 funded from the resources of specific university research and by the Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme project No.LO1303 (MSMT-7778/2014) and also by the European Regional Development Fund under the project CEBIA-Tech No. CZ.1.05/2.1.00/03.0089.