The influence of the injection molding on mechanical properties of EPDM rubber testing samples

Škrobák, Adam; Staněk, Michal; Maňas, David; Ovsík, Martin; Šenkeřík, Vojtěch; Řezníček, Martin; Hýlová, Lenka

dc.title	The influence of the injection molding on mechanical properties of EPDM rubber testing samples	en
dc.contributor.author	Škrobák, Adam
dc.contributor.author	Staněk, Michal
dc.contributor.author	Maňas, David
dc.contributor.author	Ovsík, Martin
dc.contributor.author	Šenkeřík, Vojtěch
dc.contributor.author	Řezníček, Martin
dc.contributor.author	Hýlová, Lenka
dc.relation.ispartof	Proceedings of the 2016 International Conference on Innovative Material Science and Technology (IMST 2016)
dc.identifier.issn	1951-6851 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.isbn	978-94-6252-269-5
dc.date.issued	2016
utb.relation.volume	139
dc.citation.spage	411
dc.citation.epage	415
dc.event.title	International Conference on Innovative Material Science and Technology (IMST)
dc.event.location	Shenzhen
utb.event.state-en	China
utb.event.state-cs	Čína
dc.event.sdate	2016-08-19
dc.event.edate	2016-08-21
dc.type	conferenceObject
dc.language.iso	en
dc.publisher	Atlantis Press
dc.relation.uri	http://www.atlantis-press.com/php/pub.php?publication=imst-16&frame=http%3A//www.atlantis-press.com/php/paper-details.php%3Ffrom%3Dauthor+index%26id%3D25866223%26querystr%3Dauthorstr%253DH
dc.subject	injection molding	en
dc.subject	compression molding	en
dc.subject	mechanical properties	en
dc.subject	rubber compound	en
dc.description.abstract	The paper deals with the impact of the production process on mechanical properties (tensile strength and tear strength) of a standardized testing sample made of rubber compound based on ethylene propylene diene rubber produced by injection molding in comparison with a sample produced by classic preparation (cutting out a compression molded plate) according to the standard ISO 23529.	en
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1007029
utb.identifier.obdid	43876174
utb.identifier.wok	000391726800061
utb.source	d-wok
dc.date.accessioned	2017-07-25T08:54:47Z
dc.date.available	2017-07-25T08:54:47Z
dc.rights	Attribution-NonCommercial 4.0 International
dc.rights.uri	https://creativecommons.org/licenses/by-nc/4.0/
dc.rights.access	openAccess
utb.contributor.internalauthor	Škrobák, Adam
utb.contributor.internalauthor	Staněk, Michal
utb.contributor.internalauthor	Maňas, David
utb.contributor.internalauthor	Ovsík, Martin
utb.contributor.internalauthor	Šenkeřík, Vojtěch
utb.contributor.internalauthor	Řezníček, Martin
utb.contributor.internalauthor	Hýlová, Lenka
utb.fulltext.affiliation	Adam Skrobak , Michal Stanek, David Manas, Martin Ovsik, Vojtech Senkerik, Martin Reznicek and Lenka Hylova Tomas Bata University in Zlin, TGM 5555, 760 01 Zlin, Czech Republic a Corresponding author: [email protected]
utb.fulltext.dates	-
utb.fulltext.sponsorship	This work was supported by the Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme project No.LO1303 (MSMT-7778/2014) and also by the European Regional Development Fund under the project CEBIA-Tech No. CZ.1.05/2.1.00/03.0089 and the internal grant of TBU in Zlin No.IGA/FT/2016/010 are funded from the resources of specific university research and by the Ministry of Education, Youth and Sports of the Czech Republic.