Publikace UTB
Repozitář publikační činnosti UTB

Effect of length of glass fibers in recycled polypropylene on mechanical properties

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Effect of length of glass fibers in recycled polypropylene on mechanical properties en
dc.contributor.author Šenkeřík, Vojtěch
dc.contributor.author Staněk, Michal
dc.contributor.author Maňas, David
dc.contributor.author Škrobák, Adam
dc.relation.ispartof MM Science Journal
dc.identifier.issn 1803-1269 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2016
utb.relation.volume 2016
utb.relation.issue OCTOBER
dc.citation.spage 1114
dc.citation.epage 1117
dc.type article
dc.language.iso en
dc.publisher MM publishing Ltd.
dc.identifier.doi 10.17973/MMSJ.2016_10_201679
dc.relation.uri http://www.mmscience.eu/october-2016.html
dc.subject Glass fiber en
dc.subject Particle size en
dc.subject Polypropylene en
dc.subject Recycling en
dc.subject Sieving en
dc.subject Tensile properties en
dc.description.abstract This article investigates the effect of recycled material particle size on the resulting mechanical properties of products. The product material was polypropylene with glass fibers. Recycled material was prepared by mechanical way of recyclation, then it was categorized by sieve analysis to different size of particles. After preparation, the samples were subjugated to mechanical tests. The samples were subjected to the Charpy impact test, the hardness of Shore D test. Testing was conducted at ambient temperatures. The effect of reprocessing of the material is mainly represented by fiber shortening. As a result, considerable reduction of mechanical properties can be observed. © 2016, MM publishing Ltd. All rights reserved. en
utb.faculty Faculty of Technology
dc.identifier.uri http://hdl.handle.net/10563/1006736
utb.identifier.obdid 43875255
utb.identifier.scopus 2-s2.0-84988810040
utb.source j-scopus
dc.date.accessioned 2016-12-22T16:19:01Z
dc.date.available 2016-12-22T16:19:01Z
utb.contributor.internalauthor Šenkeřík, Vojtěch
utb.contributor.internalauthor Staněk, Michal
utb.contributor.internalauthor Maňas, David
utb.contributor.internalauthor Škrobák, Adam
utb.fulltext.affiliation VOJTECH SENKERIK, MICHAL STANEK, DAVID MANAS, ADAM SKROBAK Tomas Bata University in Zlin, Zlin, Czech Republic CONTACTS Ing. Vojtech Senkerik Tomas Bata University in Zlin nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic Tel.: + 420 57603 5100 e-mail: [email protected] www.utb.cz Ing. Michal Stanek, Ph.D. Tomas Bata University in Zlin nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic e-mail: [email protected] www.utb.cz doc. Ing. David Manas, Ph.D. Tomas Bata University in Zlin nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic e-mail: [email protected] www.utb.cz Ing. Adam Skrobak Tomas Bata University in Zlin nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic e-mail: [email protected] www.utb.cz
utb.fulltext.dates -
utb.fulltext.sponsorship This paper is supported by the internal grant of TBU in Zlin No. IGA/FT/2016/010 funded from the resources of specific university research and by the Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme project No. LO1303 (MSMT-7778/2014) and also by the European Regional Development Fund under the project CEBIA-Tech No. CZ.1.05/2.1.00/03.0089.
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam