Publikace UTB
Repozitář publikační činnosti UTB

Fracture properties of polypropylene reinforced with short glass fibres: the influence of temperature, notch length and geometry

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Fracture properties of polypropylene reinforced with short glass fibres: the influence of temperature, notch length and geometry en
dc.contributor.author Elisek, Petr
dc.contributor.author Raab, Miroslav
dc.relation.ispartof Engineering against Fracture
dc.identifier.isbn 978-1-4020-9401-9
dc.date.issued 2009
dc.event.location Dordrecht
utb.event.state-en Netherlands
utb.event.state-cs Nizozemsko
dc.type bookPart
dc.language.iso en
dc.publisher Springer Science+Business Media B.V.
dc.subject polypropylene en
dc.subject structure modifications en
dc.subject short glass fibers en
dc.subject fracture toughness en
dc.subject stress intensity factor en
dc.subject J-integral en
dc.subject dynamic modulus of elasticity en
dc.subject dynamic yield strength en
dc.subject instrumented Charpy pendulum en
dc.description.abstract Commercial grades of isotactic polypropylene TATREN TI 924 and SLOVALEN PH 61 GF 30 were used for preparation of specimens with 0, 10, 20 and 30 % of short glass fibres reinforcement ratio. Injection-moulded specimens were notched and exposed to impact bending tests with instrumented Charpy pendulum MFL Systeme. For each type of specimen the measurement was repeated 10 times for the assessment of the dynamic modulus of elasticity (res. dynamic yield strength) and 5 times for the fracture toughness evaluation. Fracture toughness characteristics were evaluated in temperatures range from -40 to 50 °C with 10°C increment. The influence of notch length and geometry on fracture toughness characteristics were evaluated at the temperatures of (20 ?1) °C. en
utb.faculty Faculty of Technology
dc.identifier.uri http://hdl.handle.net/10563/1006094
utb.identifier.rivid RIV/70883521:28110/09:63508775!RIV10-MSM-28110___
utb.source c-riv
dc.date.accessioned 2016-04-28T10:37:45Z
dc.date.available 2016-04-28T10:37:45Z
dc.description.sponsorship V
dc.format.extent 581
utb.contributor.internalauthor Elisek, Petr
riv.obor CF
utb.fulltext.affiliation Petr Elisek, Miroslav Raab Tomas Bata University, Faculty of Technology, TGM 275, 762 72 Zlín, Czech Republic Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského nám. 2, 162 06 Prague, Czech Republic e-mail: [email protected]
utb.fulltext.dates -
utb.fulltext.faculty Faculty of Technology
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam