Flame resistance and mechanical properties of composites based on new advanced resin system fr4/12

Rusnák, Vladimír; Rusnáková, Soňa; Fojtl, Ladislav; Žaludek, Milan; Čapka, Alexander

dc.title	Flame resistance and mechanical properties of composites based on new advanced resin system fr4/12	en
dc.contributor.author	Rusnák, Vladimír
dc.contributor.author	Rusnáková, Soňa
dc.contributor.author	Fojtl, Ladislav
dc.contributor.author	Žaludek, Milan
dc.contributor.author	Čapka, Alexander
dc.relation.ispartof	Materiali in Tehnologije
dc.identifier.issn	1580-2949 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2015
utb.relation.volume	49
utb.relation.issue	5
dc.citation.spage	821
dc.citation.epage	824
dc.type	article
dc.language.iso	en
dc.publisher	Institut za Kovinske Materiale in Tehnologije Ljubljana
dc.identifier.doi	10.17222/mit.2014.223
dc.relation.uri	http://mit.imt.si/Revija/mit155.html
dc.subject	flame-retardant composites	en
dc.subject	phosphorus	en
dc.subject	RTM	en
dc.subject	vacuum infusion	en
dc.description.abstract	Composite materials used in the transport industry and also in other sectors must have a certain degree of flame resistance. For this purpose, commonly used flame retardants are based on halogen compounds in the liquid state or aluminum hydroxide in the solid state. Solid flame retardants have a negative effect on the processing and mechanical properties. Low viscosity and rapid wettability of fibers are very important, especially in an resin transfer molding (RTM) process. Therefore, a new advanced matrix system based on phosphorus flame retardants was developed. The flame resistance and mechanical properties of the composite materials produced from the new resin system were tested. Furthermore, the processing parameters and tests are described in the article.	en
utb.faculty	Faculty of Technology
dc.identifier.uri	http://hdl.handle.net/10563/1005758
utb.identifier.rivid	RIV/70883521:28610/15:43873233!RIV16-MSM-28610___
utb.identifier.obdid	43873668
utb.identifier.scopus	2-s2.0-84947705111
utb.identifier.wok	000362700700026
utb.source	j-wok
dc.date.accessioned	2015-12-14T17:36:43Z
dc.date.available	2015-12-14T17:36:43Z
dc.description.sponsorship	Ministry of Industry and Trade of the Czech Republic [FR-T13/433]; TBU in Zlin [IGA/FT/2015/001]
dc.rights.uri	http://mit.imt.si/
dc.rights.access	openAccess
utb.contributor.internalauthor	Rusnáková, Soňa
utb.contributor.internalauthor	Fojtl, Ladislav
utb.contributor.internalauthor	Žaludek, Milan
utb.contributor.internalauthor	Čapka, Alexander
utb.fulltext.affiliation	Vladimír Rusnák1, Soňa Rusnáková2, Ladislav Fojtl2, Milan Žaludek2, Alexander Čapka2 1 Faculty of Metallurgy and Materials Engineering, VŠB-Technical University of Ostrava, 17. listopadu 15, 708 33 Ostrava-Poruba, Czech Republic 2 Faculty of Technology, TBU in Zlín, Nad Stranemi 4511, 760 05 Zlín, Czech Republic [email protected]
utb.fulltext.dates	Prejem rokopisa – received: 2014-09-10; sprejem za objavo – accepted for publication: 2014-11-24
utb.fulltext.references	1 Fire retardant polyester systems, Product guide of the Reichhold company 2 N. Sain, S. H. Park, F. Suhara, S. Law, Flame retardant and mechanical properties of natural fibre-PP composites containing magnesium hydroxide, Polymer Degradation and Stability, 83 (2004), 363–367, doi:10.1016/S0141-3910(03)00280-5 3 A. Genovese, R. A. Shanks, Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate, Polymer Degradation and Stability, 92 (2007) 1, 2–13, doi:10.1016/j.polymdegradstab.2006.10.006 4 A. P. Mouritz, A. G. Gibson, Fire properties of polymer composite materials, vol. 143, Springer, Netherlands 2006, 401, doi:10.1007/978-1-4020-5356-6 5 G. E. Zaikov, S. M. Lomakin, S. V. Usachev, E. V. Koverzanova, N. G. Shilkina, L. V. Ruban, New Approaches to Reduce Plastic Combustibility, In: A. K. Kulshreshtha, C. Vasile (Eds.), Handbook of Polymer Blends and Composites, Volume 2, Smithers Rapra Technology, UK 2002, 165–199 6 EN ISO 2555:1989, Plastics, Resins in the liquid state or as emulsions or dispersions, Determination of apparent viscosity by the Brookfield Test method, 1989 7 ISO 178:2010, Plastics, Determination of flexural properties, 2010 8 EN ISO 4589-2:1999, Plastics, Determination of burning behaviour by oxygen index, Ambient-temperature test, 1999 9 ISO 5658-2:2006, Reaction to fire tests, Spread of flame – Part 2: Lateral spread on building and transport products in vertical configuration, 2006
utb.fulltext.sponsorship	This work and the project were realized with the financial support of the Ministry of Industry and Trade of the Czech Republic, project number FR-T13/433. Further, this study was also supported by an internal grant of TBU in Zlín, No. IGA/FT/2015/001, funded from the resources for specific university research.