Usage of boris environment for control of real-time laboratory model

Chalupa, Petr

Název:

Autor:

Chalupa, Petr

Typ dokumentu:

Článek ve sborníku (English)

Zdrojový dok.:

IFAC Proceedings Volumes (IFAC-PapersOnline). 2006, vol. 7, issue PART 1, p. 88-93

ISSN:

1474-6670 (Sherpa/RoMEO, JCR)

Journal Impact This chart shows the development of journal-level impact metrics in time

JCR	Journal Citation Reports - Impact Factor
SNIP	SCImago Source Normalized Impact per Paper
SJR	SCImago Journal Rank
IPP	SCImago Impact per Publication
CS	Scopus CiteScore

(Note: The metrics are not comparable against one another.)

ISBN:

978-3-902661-07-4

DOI:

https://doi.org/10.3182/20060621-3-ES-2905.00017

Abstrakt:

The paper deals with the usage of a BORIS control and simulation environment for the identification and control of a real-time laboratory model. Identification and control experiments were performed using Gas Flow Control model by Leybold. This model is a part of a Real-time Models Laboratory at Tomas Bata University in Zlin. The aim of this paper is to introduce an experiment performed using the BORIS environment and explore usability of this environment for the real-time control. Interoperability and comparison with the well-known MATLAB/Simulink environment is also discussed. Copyright © 2006 IFAC.

Plný text:

http://www.ifac-papersonline.net/Detailed/29616.html

Zobrazit celý záznam

Soubory tohoto záznamu

Název: Fulltext_1005003.pdf

Velikost: 718.9Kb

Formát: PDF

Popis: fulltext

Citace ČSN ISO 690:2011

Citace článku v konferenčním sborníku:
CHALUPA, Petr. Usage of boris environment for control of real-time laboratory model. In: IFAC Proceedings Volumes (IFAC-PapersOnline) [online]. Madrid: 2006, s. 88-93. [cit. 2024-12-13]. ISSN 1474-6670. Dostupné z: http://www.ifac-papersonline.net/Detailed/29616.html.

Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.