Publikace UTB
Repozitář publikační činnosti UTB
High temperature mechanical properties of peroxide cross-linked ethylene-octene copolymer
Repozitář DSpace/Manakin
Kontaktujte nás | Jazyk: čeština English
- Domovská stránka DSpace
- →
- Článek ve sborníku
- →
- Fakulta technologická
- →
- Zobrazit záznam
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.title | High temperature mechanical properties of peroxide cross-linked ethylene-octene copolymer | en |
| dc.contributor.author | Theravalappil, Rajesh | |
| dc.contributor.author | Svoboda (FT), Petr | |
| dc.contributor.author | Poongavalappil, Sameepa | |
| dc.relation.ispartof | Annual Technical Conference - ANTEC, Conference Proceedings | |
| dc.identifier.isbn | 978-1-61782-960-4 | |
| dc.date.issued | 2011 | |
| utb.relation.volume | 3 | |
| dc.citation.spage | 2558 | |
| dc.citation.epage | 2560 | |
| dc.event.title | 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011 | |
| dc.event.location | Boston, MA | |
| utb.event.state-en | United States | |
| utb.event.state-cs | Spojené státy americké | |
| dc.event.sdate | 2011-05-01 | |
| dc.event.edate | 2011-05-05 | |
| dc.type | conferenceObject | |
| dc.language.iso | en | |
| dc.relation.uri | http://www.4spe.org/Resources/resource.aspx?ItemNumber=10121 | |
| dc.subject | creep | en |
| dc.subject | cross-linking | en |
| dc.subject | ethylene-octene | en |
| dc.subject | peroxide | en |
| dc.subject | residual strain | en |
| dc.subject | TPV | en |
| dc.description.abstract | Ethylene-octene copolymer (EOC) was cross-linked by dicumyl peroxide (DCP). Thermoplastic vulcanizate (TPV) based on polypropylene (PP)/EOC-DCP was prepared by dynamic vulcanization. Gel content was noted. Tensile creep properties of these samples at elevated temperatures (70- 200°C) were studied. Residual strain after 100% and 200% elongation were examined. EOC cross-linked with lower peroxide levels underwent creep failure easily at lower temperatures even with small loads. EOC with 0.6 wt. % of DCP was found to be the strongest even at higher temperatures and lower temperatures with heavier loads. | en |
| utb.faculty | Faculty of Technology | |
| dc.identifier.uri | http://hdl.handle.net/10563/1004863 | |
| utb.identifier.obdid | 43874195 | |
| utb.identifier.scopus | 2-s2.0-80051808935 | |
| utb.identifier.coden | ACPED | |
| utb.source | d-scopus | |
| dc.date.accessioned | 2015-06-04T12:55:47Z | |
| dc.date.available | 2015-06-04T12:55:47Z | |
| utb.contributor.internalauthor | Theravalappil, Rajesh | |
| utb.contributor.internalauthor | Svoboda (FT), Petr | |
| utb.contributor.internalauthor | Poongavalappil, Sameepa | |
| utb.fulltext.affiliation | Rajesh Theravalappil1, Petr Svoboda1, 2, Sameepa Poongavalappil1 1 Faculty of Technology, Tomas Bata University in Zlin, Nam. TG Masaryka 275, 76272, Zlin, Czech Republic. 2 Centre of Polymer Systems, Tomas Bata University in Zlin, Nam.TG Masaryka 5555, 76001, Zlin, Czech Republic. [email protected] | |
| utb.fulltext.dates | - | |
| utb.fulltext.references | 1. U. Basuli, T. K. Chaki and K. Naskar, Journal of Applied Polymer Science, 108, 1079-1085 (2008). 2. P. Slobodian, D. Kralova, A. Lengalova, R. Novotny and P. Saha, Polymer Composites, 31, 452-458 (2010) 3. V. Devasenapathi, P. Monish and S. B. Prabu, International Journal of Advanced Manufacturing Technology, 44, 412-418 (2009). 4. Y. Xu, Q. Wu, Y. Lei and F. Yao, Bioresource Technology, 101, 3280-3286 (2010). 5. P.E. Tomlins, B.E. Read and G.D. Dean, Polymer, 35, 4376-4381 (1994). 6. A. H-Ulloa, J-R. M. D’Almeida and J-P. Habas, Polymer Engineering and Science, 50, 2122-2130 (2010). 7. B. Patham and K. Jayaraman, Journal of Rheology, 49, 989-999 (2005). 8. W. Kamphunthong and K. Sirisinha, Journal of Applied Polymer Science, 109, 2347-2353 (2008). | |
| utb.fulltext.sponsorship | This work has been supported by the Internal Grant Authority (SVV-IGA/4/FT/10/D) of Tomas Bata University in Zlin. |
