Publikace UTB
Repozitář publikační činnosti UTB

Biodeterioration of plasticized PVC/montmorillonite nanocomposites in aerobic soil environment

Repozitář DSpace/Manakin

Zobrazit minimální záznam


dc.title Biodeterioration of plasticized PVC/montmorillonite nanocomposites in aerobic soil environment en
dc.contributor.author Julinová, Markéta
dc.contributor.author Slavík, Roman
dc.contributor.author Kalendová, Alena
dc.contributor.author Šmída, Petr
dc.contributor.author Kratina, Jaromír
dc.relation.ispartof Iranian Polymer Journal
dc.identifier.issn 1026-1265 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.issn 1735-5265 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued 2014
utb.relation.volume 23
utb.relation.issue 7
dc.citation.spage 547
dc.citation.epage 557
dc.type article
dc.language.iso en
dc.publisher Springer-Verlag London Ltd.
dc.identifier.doi 10.1007/s13726-014-0249-4
dc.relation.uri https://link.springer.com/article/10.1007/s13726-014-0249-4
dc.subject Biodeterioration en
dc.subject Cloisite en
dc.subject Plasticizer en
dc.subject Poly(vinyl chloride) en
dc.subject Soil environment en
dc.description.abstract The aim of this study was to assess the effect of montmorillonite nanofillers, Cloisite Na+ and Cloisite 30B, on the biodeterioration of PVC-based nanocomposites plasticized by means of dioctyl adipate (DOA), dioctyl phthalate (DOP) and modified poly(propylene adipate) (PPA), in the aerobic environment of soil (soil burial test, time of exposure: 198 days). Tests were carried out at 25 ± 1 °C, under moisture-controlled (55 %) and aerobic conditions. The extent of the biodeterioration process was evaluated on the basis of changes in weight, tensile strength and elongation-at-break values. Finally, analysing chemical structures using FTIR and visual observation, both macroscopic and microscopic via scanning electron microscopy assisted in the evaluation process. The results of this study suggested that plasticized PVC/montmorillonite nanocomposites have an increased susceptibility for undergoing biological deterioration in comparison with plasticized PVC. In each instance, adding Cloisite 30B resulted in reducing the resistance of PVC/montmorillonite nanocomposites to the actions of microorganisms. In the case of Cloisite Na+ as the filler, results cannot be clearly quantified, although a negative influence prevailed, particularly a change in colour, whose change intensity was also dependent on the type of plasticizer, increasing in the following sequence: PVC/DOA/Cloisite Na+ > PVC/DOP/Cloisite Na+ > PVC/PPA/Cloisite Na+. However, each sample containing Cloisite Na+ achieved a lower rate of degradation (by normalised weight loss and FTIR) compared with nanocomposites containing Cloisite 30B. This can be attributed to the migration and accumulation of Cloisite Na+ on the surface of the nanocomposites particles where the former phenomenon producing a surface barrier which caused a reduction in the permeability of the material toward water and microorganisms, during the test. © 2014 Iran Polymer and Petrochemical Institute. en
utb.faculty University Institute
utb.faculty Faculty of Technology
dc.identifier.uri http://hdl.handle.net/10563/1003819
utb.identifier.obdid 43871792
utb.identifier.scopus 2-s2.0-84903119746
utb.identifier.wok 000344576500006
utb.identifier.coden IPJOF
utb.source j-scopus
dc.date.accessioned 2014-08-05T09:56:30Z
dc.date.available 2014-08-05T09:56:30Z
utb.ou Centre of Polymer Systems
utb.contributor.internalauthor Julinová, Markéta
utb.contributor.internalauthor Slavík, Roman
utb.contributor.internalauthor Kalendová, Alena
utb.contributor.internalauthor Šmída, Petr
utb.contributor.internalauthor Kratina, Jaromír
utb.fulltext.affiliation Marketa Julinova • Roman Slavik • Alena Kalendova • Petr Smida • Jaromir Kratina M. Julinova A. Kalendova Centre of Polymer Systems, University Institute, Tomas Bata, University in Zlin, Nad Ovcirnou 3685, 760 01 Zlin, Czech Republic M. Julinova R. Slavik (&) P. Smida J. Kratina Department of Environment Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, nám. T.G.Masaryka 275, 762 72 Zlin, Czech Republic ; e-mail: [email protected] A. Kalendova Department of Polymer Engineering, Faculty of Technology, Tomas Bata University in Zlin, nám. T.G.Masaryka 275, 762 72 Zlin, Czech Republic
utb.fulltext.dates Received: 9 September 2013 Accepted: 20 April 2014 Published online: 14 May 2014
utb.fulltext.sponsorship This research was created with support of Operational Programme Research and Development for Innovations co-funded by the European Regional Development Fund (ERDF) and national budget of Czech Republic within the framework of the Centre of Polymer Systems project (Reg. Number: CZ.1.05/2.1.00/03.0111) and Internal Grant from TBU in Zlin no. IGA/FT/2014/005.
utb.fulltext.projects CZ.1.05/2.1.00/03.0111
utb.fulltext.projects IGA/FT/2014/005
utb.fulltext.faculty University Institute
utb.fulltext.faculty Faculty of Technology
utb.fulltext.faculty Faculty of Technology
utb.fulltext.ou Centre of Polymer Systems
utb.fulltext.ou Department of Environment Protection Engineering
utb.fulltext.ou Department of Polymer Engineering
Find Full text

Soubory tohoto záznamu

Zobrazit minimální záznam