Influence of high pressure on thermal behavior of poly(1-butene) homopolymers

Kalous, Jiří; Beníček, Lubomír; Čermák, Roman

dc.title	Influence of high pressure on thermal behavior of poly(1-butene) homopolymers	en
dc.contributor.author	Kalous, Jiří
dc.contributor.author	Beníček, Lubomír
dc.contributor.author	Čermák, Roman
dc.relation.ispartof	Chemické listy
dc.identifier.issn	0009-2770 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.issn	1213-7103 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2014
utb.relation.volume	108
utb.relation.issue	SPEC. ISSUE 1
dc.citation.spage	s21
dc.citation.epage	s25
dc.type	article
dc.language.iso	en
dc.publisher	Česká společnost chemická (ČSCH)
dc.relation.uri	http://www.chemicke-listy.cz/common/content-issue_s1-volume_108-year_2014.html
dc.subject	High-pressure crystallization	en
dc.subject	Phase transformation	en
dc.subject	Poly(1-butene)	en
dc.description.abstract	Present work study the effect of high-pressure crystallization on morphology and thermal behavior of two different homopolymers of isotactic poly(1-butene). Both materials were non-isothermally crystallized under pressure in range from 20 to 200 MPa using a pvT 100 apparatus and thus prepared samples were investigated using differential scanning calorimetry and polarized light microscopy. Results showed significant effect of pressure on formation of metastable phases I' and II with respect to material properties on thermal behavior and morphology in isotactic poly(1-butene).	en
utb.faculty	University Institute
utb.faculty	Faculty of Technology
dc.identifier.uri	http://hdl.handle.net/10563/1003792
utb.identifier.obdid	43871811
utb.identifier.scopus	2-s2.0-84901835914
utb.identifier.wok	000344829700005
utb.identifier.coden	CHLSA
utb.source	j-scopus
dc.date.accessioned	2014-07-07T13:44:05Z
dc.date.available	2014-07-07T13:44:05Z
dc.description.sponsorship	European Social Fund (ESF); national budget of the Czech Republic, within the project 'Advanced Theoretical and Experimental Studies of Polymer Systems' [CZ. 1.07/2.3.00/20.0104]; 'Research and Development for Innovations' Operational Programme - European Regional Development Fund (ERDF); national budget of the Czech Republic, within the project entitled 'Centre of Polymer Systems' [CZ. 1.05/2.1.00/03.0111]; TBU in Zlin [IGA/FT/2012/040]
utb.ou	Centre of Polymer Systems
utb.contributor.internalauthor	Kalous, Jiří
utb.contributor.internalauthor	Beníček, Lubomír
utb.contributor.internalauthor	Čermák, Roman
utb.fulltext.affiliation	JIŘÍ KALOUS a,b, LUBOMÍR BENÍČEK a,b, and ROMAN ČERMÁK a,b a Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Nad Ovcirnou 3685, 760 01 Zlin, b Department of Polymer Engineering, Faculty of Technology, Tomas Bata University in Zlin, nám. T. G. Masaryka 275, 762 72 Zlin [email protected]
utb.fulltext.dates	-
utb.fulltext.sponsorship	This contribution was written with the support of the ´Operational Program Education for Competitiveness´ cofunded by the European Social Fund (ESF) and the national budget of the Czech Republic, within the project ´Advanced Theoretical and Experimental Studies of Polymer Systems´ (reg. number: CZ.1.07/2.3.00/20.0104) and with the support of the ´Research and Development for Innovations´ Operational Programme co-funded by the European Regional Development Fund (ERDF) and the national budget of the Czech Republic, within the project entitled ´Centre of Polymer Systems´ (reg. number: CZ.1.05/2.1.00/03.0111). Authors gratefully acknowledge the financial support of this work by the internal grant of TBU in Zlin, No. IGA/FT/2012/040, funded from resources of specific university research.
utb.fulltext.projects	CZ.1.07/2.3.00/20.0104
utb.fulltext.projects	CZ.1.05/2.1.00/03.0111
utb.fulltext.projects	IGA/FT/2012/040
utb.fulltext.faculty	Faculty of Technology
utb.fulltext.faculty	University Institute
utb.fulltext.ou	Centre of Polymer Systems
utb.fulltext.ou	Department of Polymer Engineering