Rheological properties of calcium carbonate suspensions determined from centrifugation

Paravanová, Gordana; Hausnerová, Berenika; Beltrán-Prieto, Juan Carlos

dc.title	Rheological properties of calcium carbonate suspensions determined from centrifugation	en
dc.contributor.author	Paravanová, Gordana
dc.contributor.author	Hausnerová, Berenika
dc.contributor.author	Beltrán-Prieto, Juan Carlos
dc.relation.ispartof	Chemické listy
dc.identifier.issn	0009-2770 Scopus Sources, Sherpa/RoMEO, JCR
dc.identifier.issn	1213-7103 Scopus Sources, Sherpa/RoMEO, JCR
dc.date.issued	2014
utb.relation.volume	108
utb.relation.issue	SPEC. ISSUE 1
dc.citation.spage	s32
dc.citation.epage	s34
dc.type	article
dc.language.iso	en
dc.publisher	Česká společnost chemická (ČSCH)
dc.relation.uri	http://www.chemicke-listy.cz/common/content-issue_s1-volume_108-year_2014.html
dc.subject	Calcium carbonate suspension	en
dc.subject	Centrifugation	en
dc.subject	Rheology	en
dc.description.abstract	Centrifugation method is employed for testing of rheological effectiveness of sulphonated melamineformaldehyde condensate plasticizer in calcium carbonate suspensions. It was found that yield values (critical normal and shear stresses) are governed by the dose of additive through the sorption of additive molecules on calcium carbonate particles. Moreover, critical normal stress increases with decrease of inter-particle volume of suspensions.	en
utb.faculty	University Institute
utb.faculty	Faculty of Technology
utb.faculty	Faculty of Applied Informatics
dc.identifier.uri	http://hdl.handle.net/10563/1003783
utb.identifier.obdid	43871820
utb.identifier.scopus	2-s2.0-84901838851
utb.identifier.wok	000344829700007
utb.identifier.coden	CHLSA
utb.source	j-scopus
dc.date.accessioned	2014-07-07T13:44:00Z
dc.date.available	2014-07-07T13:44:00Z
dc.description.sponsorship	European Social Fund (ESF); national budget of the Czech Republic, within the project 'Advanced Theoretical and Experimental Studies of Polymer Systems' [CZ.1.07/2.3.00/20.0104]; 'Research and Development for Innovations' Operational Programme - the European Regional Development Fund (ERDF); national budget of the Czech Republic, within the project entitled 'Centre of Polymer Systems' [CZ.1.05/2.1.00/03.0111]
utb.ou	Centre of Polymer Systems
utb.contributor.internalauthor	Paravanová, Gordana
utb.contributor.internalauthor	Hausnerová, Berenika
utb.contributor.internalauthor	Beltrán-Prieto, Juan Carlos
utb.fulltext.affiliation	GORDANA PARAVANOVA a , BERENIKA HAUSNEROVA a,b, and JUAN CARLOS BELTRAN-PRIETO c a Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin, Nad Ovčírnou 3685, 760 01 Zlín, b Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlin, nám. T.G. Masaryka 275, 762 72 Zlín, c Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlin, Nad Stráněmi 4511, 760 05 Zlín [email protected]
utb.fulltext.dates	-
utb.fulltext.sponsorship	This contribution was written with the support of the ´Operational Program Education for Competitiveness´ cofunded by the European Social Fund (ESF) and the national budget of the Czech Republic, within the project ´Advanced Theoretical and Experimental Studies of Polymer Systems´ (reg. number: CZ.1.07/2.3.00/20.0104) and with the support of the ´Research and Development for Innovations´ Operational Programme co-funded by the European Regional Development Fund (ERDF) and the national budget of the Czech Republic, within the project entitled ´Centre of Polymer Systems´ (reg. number: CZ.1.05/2.1.00/03.0111). Special acknowledgement is dedicated to Professor Tibor Sebök (in memoriam).
utb.fulltext.projects	CZ.1.07/2.3.00/20.0104
utb.fulltext.projects	CZ.1.05/2.1.00/03.0111
utb.fulltext.faculty	University Institute
utb.fulltext.faculty	Faculty of Technology
utb.fulltext.faculty	Faculty of Applied Informatics
utb.fulltext.ou	Centre of Polymer Systems
utb.fulltext.ou	Department of Production Engineering
utb.fulltext.ou	Department of Automation and Control Engineering