Evaluation of bulk modulus of oil system with hydraulic line

Hružík, Lumír; Vašina, Martin; Bureček, Adam

Název:	Evaluation of bulk modulus of oil system with hydraulic line
Autor:	Hružík, Lumír; Vašina, Martin; Bureček, Adam
Typ dokumentu:	Článek ve sborníku (English)
Zdrojový dok.:	EPJ Web of Conferences. 2013, vol. 45
ISSN:	2101-6275 (Sherpa/RoMEO, JCR)

ISBN:	978-80-7372-912-7
DOI:	https://doi.org/10.1051/epjconf/20134501041
Abstrakt:	The aim of the paper is to experimentally measure and ealuate bulk modulus of oil/steel pipe system and oil/hose system. The measurement was performed using experimental device on the basis of a measured pressure difference depending on time. Bulk modulus is evaluated from pressure change with known flow and volume of line. Pressure rise is caused by valve closure at the line end. Furthermore, a mathematical model of the experimental device is created using Matlab SimHydraulics software. Time dependencies of pressure for the oil/steel pipe system and the oil/hose system are simulated on this mathematical model. The simulations are verified by experiment. © Owned by the authors, published by EDP Sciences, 2013.
Plný text:	http://www.epj-conferences.org/articles/epjconf/abs/2013/06/epjconf_efm2013_01041/epjconf_efm2013_01041.html
Zobrazit celý záznam

Soubory tohoto záznamu

Název: Fulltext_1003600.pdf

Velikost: 1.460Mb

Formát: PDF

Popis: fulltext

Zobrazit/otevřít

Citace ČSN ISO 690:2011

Citace článku v konferenčním sborníku:
HRUŽÍK, Lumír, Martin VAŠINA a Adam BUREČEK. Evaluation of bulk modulus of oil system with hydraulic line. In: EPJ Web of Conferences [online]. Hradec Králové: EDP Sciences, 2013 [cit. 2024-12-12]. ISSN 2101-6275. Dostupné z: http://www.epj-conferences.org/articles/epjconf/abs/2013/06/epjconf_efm2013_01041/epjconf_efm2013_01041.html.

Tyto citace vytvořil software a mohou obsahovat chyby. Pro ověření přesnosti si nastudujte příslušnou citační normu nebo příručku.