3D air filtration modeling for nanofiber based filters in the ultrafine particle size range

Sambaer, Wannes; Zatloukal, Martin; Kimmer, Dušan

Title:

Author:

Sambaer, Wannes; Zatloukal, Martin; Kimmer, Dušan

Document type:

Conference paper (English)

Source document:

Novel Trends in Rheology IV. 2011, vol. 1375, p. 320-333

ISSN:

0094-243X (Sherpa/RoMEO, JCR)

Journal Impact This chart shows the development of journal-level impact metrics in time

JCR	Journal Citation Reports - Impact Factor
SNIP	SCImago Source Normalized Impact per Paper
SJR	SCImago Journal Rank
IPP	SCImago Impact per Publication
CS	Scopus CiteScore

(Note: The metrics are not comparable against one another.)

ISBN:

978-0-7354-0935-4

DOI:

https://doi.org/10.1063/1.3604492

Abstract:

In this work, novel 3D filtration model for nanofiber based filters has been proposed and tested. For the model validation purposes, filtration efficiency characteristics of two different polyurethane nanofiber based structures (prepared by the electrospinning process) were determined experimentally in the ultrafine particle size range (20-400 nm). It has been found that the proposed model is able to reasonably predict the measured filtration efficiency curves for both tested samples.

Full text:

http://proceedings.aip.org/resource/2/apcpcs/1375/1/320_1?isAuthorized=no

Show full item record

Files in this item

Name: Fulltext_1002821.pdf

Size: 1.160Mb

Format: PDF

Description: fulltext

View/Open

ČSN ISO 690:2011 citation

Citace článku v konferenčním sborníku:
SAMBAER, Wannes, Martin ZATLOUKAL a Dušan KIMMER. 3D air filtration modeling for nanofiber based filters in the ultrafine particle size range. In: Novel Trends in Rheology IV [online]. Zlín: American Institute of Physics (AIP), 2011, s. 320-333. [cit. 2024-12-13]. ISSN 0094-243X. Dostupné z: http://proceedings.aip.org/resource/2/apcpcs/1375/1/320_1?isAuthorized=no.

These citations are software generated and may contain errors. To verify accuracy, check the appropriate style guide.