Kontaktujte nás | Jazyk: čeština English
dc.title | Adaptive nonlinear control of a continuous stirred tank reactor | en |
dc.contributor.author | Dostál, Petr | |
dc.contributor.author | Bakošová, Monika | |
dc.contributor.author | Vojtěšek, Jiří | |
dc.contributor.author | Bobál, Vladimír | |
dc.relation.ispartof | Chemical Papers | |
dc.identifier.issn | 0366-6352 Scopus Sources, Sherpa/RoMEO, JCR | |
dc.date.issued | 2011 | |
utb.relation.volume | 65 | |
utb.relation.issue | 5 | |
dc.citation.spage | 636 | |
dc.citation.epage | 643 | |
dc.type | article | |
dc.language.iso | en | |
dc.publisher | Versita | en |
dc.identifier.doi | 10.2478/s11696-011-0057-7 | |
dc.relation.uri | http://www.springerlink.com/content/5t05554272103340/ | |
dc.subject | chemical reactor | en |
dc.subject | nonlinear control | en |
dc.subject | adaptive control | en |
dc.subject | parameter estimation | en |
dc.subject | polynomial method | en |
dc.description.abstract | The paper deals with continuous-time nonlinear adaptive control of a continuous stirred tank reactor (CSTR). Control strategy is based on the application of a controller consisting of a linear and a nonlinear part. The static nonlinear part is derived as an inversion and exponential approximation of measured or simulated input-output data. Design of the dynamic linear part is based on an approximation of nonlinear elements in the control loop by a continuous-time external linear model with directly estimated parameters. In the control design procedure, polynomial approach with the pole assignment method was used. The nonlinear adaptive control was tested by simulations on a nonlinear model of a CSTR with a consecutive exothermic reaction. | en |
utb.faculty | Faculty of Applied Informatics | |
utb.faculty | University Institute | |
dc.identifier.uri | http://hdl.handle.net/10563/1002696 | |
utb.identifier.rivid | RIV/70883521:28140/11:43866421!RIV12-MSM-28140___ | |
utb.identifier.rivid | RIV/70883521:28610/11:43866421!RIV12-MSM-28610___ | |
utb.identifier.obdid | 43866529 | |
utb.identifier.scopus | 2-s2.0-83555173553 | |
utb.identifier.wok | 000293019500009 | |
utb.source | j-wok | |
dc.date.accessioned | 2012-02-10T13:15:32Z | |
dc.date.available | 2012-02-10T13:15:32Z | |
utb.ou | Centre of Polymer Systems | |
utb.contributor.internalauthor | Dostál, Petr | |
utb.contributor.internalauthor | Vojtěšek, Jiří | |
utb.contributor.internalauthor | Bobál, Vladimír | |
utb.fulltext.affiliation | a Petr Dostál, b Monika Bakošová*, a Jiří Vojtěšek, a Vladimír Bobál a Faculty of Applied Informatics, Tomas Bata University in Zlin, nam. T. G. Masaryka 5555, CZ-760 01 Zlín, Czech Republic b Institute of Information Engineering, Automation, and Mathematics, Faculty of Chemical and Food Technology, Slovak University of Technology, Radlinského 9, SK-812 37 Bratislava, Slovakia *Corresponding author, e-mail: [email protected] | |
utb.fulltext.dates | Received 21 January 2011 Revised 18 March 2011 Accepted 21 March 2011 | |
utb.fulltext.sponsorship | This article was written with the support of the Operational Programme Research and Development for Innovations co-funded by the European Regional Development Fund (ERDF) and the national budget of the Czech Republic within the framework of the Centre of Polymer Systems project (No. CZ.1.05/2.1.00/03.0111) and the Scientific Grant Agency of the Slovak Republic under grant No. 1/0537/10. | |
utb.fulltext.projects | CZ.1.05/2.1.00/03.0111 | |
utb.fulltext.projects | VEGA 1/0537/10 | |
utb.fulltext.faculty | Faculty of Applied Informatics | |
utb.fulltext.ou | - |